DJI RONIN 3D Focus System User Guide 使用说明 使用說明 ユーザーガイド 사용자 가이드 Bedienungsanleitung Guía del usuario Guide de l'utilisateur Guida all’uso Gebruiksaanwijzing Manual do utilizador Guia do usuário Руководство пользователя v1.0 2020.
A. 1 2 2 1 B.
EN Disclaimer and Warning Congratulations on purchasing your new DJI OSMO TM product. Please read this entire document and all safe and lawful practices DJI OSMO provided carefully before use. Failure to read and follow instructions and warnings may result in serious injury to yourself or others, damage to your DJI OSMO product, or damage to other objects in the vicinity.
Overview 1. Status Indicator 2. AF/MF Switch Button 3. USB-C Port 4. 1/4”-20 Thread to Cold Shoe Adapter 1 2 3 8 3 7 6 5 5. Thumb Screw 6. Mounting Base 7. Lock Wheel 4 8. Infrared Distance Sensor (TOF) 9. USB-C Cable ×1 ×1 9 Installation and Connection Installing on Camera Cold Shoe (Figure A) 1. Remove the 1/4”-20 thread to cold shoe adapter. 2. Install the 3D Focus System on the cold shoe of the camera and rotate the lock wheel to fix firmly. 3.
Calibration The 3D Focus System must be calibrated before using for the first time. Follow the steps below to calibrate. A person or large object must be placed in the center of the camera view in order to calibrate. 1. Power on the DJI RS 2 gimbal, swipe up on the touchscreen, tap Dial Functions, and Focus Motor. 2. Return to the home screen, swipe left, tap Create, swipe up, and tap 3D Focus . 3. Tap Lens Calibration. Perform Focus Motor Calibration by following the prompts and select the focal length.
Lens Configuration Lens configuration can be used to store up to three sets of calibrated lens parameters. Once stored, users can select parameters directly by tapping Lens Configuration. Usage If the camera lens is replaced, the focus motor must be recalibrated the next time the 3D Focus System is powered on. To calibrate the focus motor, either double tap the AF/MF Switch button or follow the prompts to calibrate the focus motor after selecting the lens in Lens Configuration.