User Manual
Table Of Contents
16
©
2016 DJI All Rights Reserved.
MATRICE 600 PRO
User Manual
Remote Controller Operations
Powering On and Off the Remote Controller
The Matrice 600 Pro remote controller is powered by a 2S rechargeable battery with a capacity of
6000mAh. The battery level is indicated by the Battery Level LEDs on the front panel. Follow the steps
below to power on your remote controller:
1. When powered off, press the Power Button once and the Battery Level LEDs will display the current
battery level.
2. Then, press and hold the Power Button to power on the remote controller.
3. The remote controller will beep when it powers on. The Status LED will blink red (slave remote
controller blinks solid purple) rapidly, indicating that the remote controller is linking to the aircraft.
The Status LED will show a solid green light (slave remote controller shows a solid cyan light) when
linking is completed.
4. Repeat step 2 to power off the remote controller after nish using it.
Charging Remote Controller
Charge the remote controller via supplied charger.