User Manual

Table Of Contents

MATRICE 600 PRO

User Manual

By default, the landing gear will not raise or lower if you toggle the control switch when the

aircraft is on the ground. Go to the DJI GO app > Camera View > > Advanced Settings >

Disable Landing Gear Auto-Lock, and then the landing gear will raise or lower if you toggle

the control switch when the aircraft is on the ground. Ensure that the switch is in the lower

position when enabling this feature. The feature will be disabled after raising and lowering the

landing gear once. Enable it in the DJI GO app if you want to raise or lower the landing gear

again.

Auto-raise and auto-lower features of the landing gear can be set in the DJI GO app. Go to

the DJI GO app > Camera View > > Advanced Settings > Self-Adaptive Landing Gear.

RTH Button

Press and hold this button to start the Return-to-Home (RTH) procedure. The LED around the RTH

Button will blink white to indicate the aircraft is entering RTH mode. The aircraft will then return to the

last recorded Home Point. Press this button again to cancel the RTH procedure and regain control of

the aircraft.

Connecting Mobile Device

1. Press the button on the side of the Mobile Device Holder to release the clamp.

2. Place your mobile device inside the clamp and adjust it to secure your mobile device.

3. Connect your mobile device to the remote controller via a USB cable.