User Manual
Table Of Contents
22
©
2016 DJI All Rights Reserved.
MATRICE 600 PRO
User Manual
Setting Up Dual Remote Controllers Mode
The Dual Remote Controllers mode is disabled by default. Users must enable this feature on the
Master Remote Controller through the DJI GO app. Follow the steps below for setup:
Master Remote Controller:
1. Connect the remote controller to your mobile device and launch the DJI GO app.
2. Go to the Camera View, and tap to enter the remote controller settings window.
3. Select Master in the Set Remote Controller Status section to set the remote controller as the Master
remote controller.
Remote Controller Settings
Set Remote Controller Status
Slave RC List
Master and Slave
Remote Controller Settings
MasterOFF
RC Name Connection Password
T12254 1234
Slave
Slave
MasterOFF
Set Remote Controller Status
Remote Controller Name
Search for Master Controller
Request Control
Master and Slave
S88642
Master RC List
T12254
Remote Controller Settings
Remote Controller Settings
4. Enter the connection password for the Slave remote controller.
Slave Remote Controller:
1. Select Slave in the Set Remote Controller Status section to set the remote controller as the Slave
remote controller.