Instructions

ROBOMASTER TT TELLO TALENT User Manual

4. Customizable Button

Press and hold the button to link via Bluetooth (when using the default rmware).

Press the button twice within 0.5 s to start the motors to cool down the aircraft. Press the button

twice within 0.5 s again to stop the motors (when using the default rmware).

The function of the button can be customized through programming. Functions include using the

button to launch programs.

5. Programmable RGB Light

The function of the RGB light is set through programming. Functions include being used as part

of a light display or as a prompt.

The status of the RGB light are shown in the table below (when using the default rmware).

RGB Light Blinking Pattern Descriptions

After powering on, the light will change color in

sequence and stop

Working normally

Blinks blue

Ready for Bluetooth connection. Press and

hold the customizable to link

Solid blue Bluetooth remote controller connected

6. Micro USB Port

Used to connect to a computer. The port can be used as a debugging port for ofine programs

when using Arduino or MicroPython.

Used to connect to a computer to update the rmware of the open-source controller.

* The default rmware is required to connect to a Bluetooth remote controller and to use the motors to

cool down the aircraft. RM Assistant can be used to restore the default rmware of the open-source

controller.

Dot-Matrix Display & Distance Sensing Module

The module integrates a 8x8 dot-matrix display and a distance sensing TOF module, allowing users

to generate different colors and graphics through programming. The default rmware is required to

use Mind+ real-time mode or the Tello EDU app to control the dot-matrix display and RGB light.