User Manual

Updating Firmware

Download the DJI Pro Assistant for Ronin and update the rmware if there is new rmware

released for Ronin-S. Follow the steps below to update the rmware:

1. Connect the Ronin-S to your computer via the USB-C Cable.

2. Click “Upgrade” and wait for the download to nish.

3. Click “Upgrade” again and then click “Conrm”.

4. Power the Ronin-S off and then on after the update is complete.

Ensure that your computer is connected to the Internet.

Do not disconnect the USB cable during the update.

If the rmware update fails, restart the Ronin-S and retry.

Maintenance

The Ronin-S is a precise machine, and its power/data ports are not waterproof. Be sure

to protect them from dust and water during use. After use, it is recommended to wipe the

Ronin-S down with a soft dry cloth. Never spray any cleaning liquids onto the Ronin-S.