User Manual

©2014 DJI Innovations. All Rights Reserved. 3
In The Box
Gimbal×1
Built-in servos and stand-alone IMU provide yaw, roll and tilt
stabilization. Integrated bottom damping plate minimizes
installation time.
Damping Unit×1
The upper plate of the damping unit connects the gimbal with the
Phantom 2. Pre-installed vibration absorbers greatly reduce the
vibrations.
Gimbal Controller Unit (GCU)×1
Connect gimbal controller to flight control system using CAN-Bus.
Power GCU and gimbal through 3S~6S power cable.
3
Accessory Pack ×1
The accessory pack includes: vibration absorbers, securing pins
and washers, screws and connection cables.
DJI
Accessory Pack – Spare Vibration Absorbers
x4
Spare vibration absorbers for damping unit with 40〬of rigidity.
Accessory Pack – Securing kits x4
Spare securing kits that are used to secure the upper and bottom
plate of the damping unit.