User Manual

©2014 DJI Innovations. All Rights Reserved. 6
1 Installation
1.1 Gimbal Description
Notes:
(1) Ensure the gimbal servos are unobstructed, failure to do so may damage the servo.
(2) Clear the obstacles at once if the operating gimbal is being blocked.
(3) Always mount camera before powering on the gimbal.
1.1.1 Rear View
11
12
13
14
16
17
18
15
1. Yaw servo driver module
2. Upper plate of damping unit
3. Vibration absorbers
4. Bottom plate of damping unit
5. Tilt servo driver module
6. Roll servo driver module
7. Camera mount
8. 8 pin connector port（to GCU/Phantom 2）