User Manual

Ronin-M

User Manual

ConguringtheHandleBar

The customizable handle bar of the Ronin-M can be removed, if necessary, by following the steps

below.

1. Loosen the two grip screws where the handle bar meets the gimbal, as shown.

2. Remove the grips from the handle bar.

3. You can remove one or both sides of the handle bar.

4. The resulting conguration is shown below.

Balancing

To obtain the best performance from the Ronin-M, proper balancing is a must. Accurate balance is

critical for shots where the Ronin-M will be subjected to extreme movements or accelerations (running,

horseback riding, biking, car mounts, helicopters, etc.). Proper balance will also offer a longer battery

runtime. There are three axes that need to be accurately balanced prior to turning on the Ronin-M and

setting up the software.

The camera needs to be fully configured, with all accessories, prior to installing and

balancing the camera on the gimbal. If the camera has a lens cap, be sure to remove it prior

to balancing. Be sure that the Ronin-M’s power is turned off while balancing the camera.

Balancing