User Manual
Ronin-M
User Manual
©
2015 DJI. All Rights Reserved.
27
You can check which version of the DJI Assistant App you are using in the Info tab.
The S/N is a 32-digit authorization code that is used to activate certain functions. The authorization
code for your unit is entered after it is manufactured. You may be asked to enter a new S/N after
upgrading. Fill in the S/N and then click the Write button. If you enter an invalid S/N more than 30 times,
the Ronin-M will be locked and you will need to contact customer support.
Info
Upgrade
You can view the latest rmware version information on this page. Upgrade the rmware by following
the steps below:
1. Connect the Ronin-M to your computer via the Micro-USB cable and wait until the indicator LED
in the PC Assistant blinks blue.
2. Click “Upgrade”.
3. Wait for the download to nish.
4. Click “Upgrade” again and then click “Conrm”.
5. Power the Ronin-M off and then on after the upgrade is complete.
Ensure that your computer is connected to the Internet.
Close any antivirus programs and network rewalls.
Ensure that the Ronin-M is powered on during the upgrade. Do not power off the Ronin-M
until the upgrade is complete.
Do not disconnect the USB cable during the upgrade.
DJI PC / MAC Assistant Tuning