User Manual

4. Click “Update” again and then click “Conrm.”

5. After the update is complete, turn the Thumb Controller off and then on

again.

6. Repeat this process with the Ronin-M or the Ronin External Receiver.

Ensure your computer is connected to the internet.

Close all antivirus programs and network rewalls.

Ensure the device is turned on before beginning the update process.

Do not disconnect the USB cable until the update is complete.

If the Thumb Controller fails to update, follow the steps below:

1. Press and hold the override button.

2. Use the USB cable to connect the Thumb Controller to the computer.

3. Now, release the override button and wait for the connection to be

established.

4. Click the “Update” button after the Thumb Controller has been successfully

connected to the DJI PC/MAC Assistant. The Thumb Controller will be

operate normally after the update is complete.