ZENMUSE Z3 User Manual V1.0 2016.
Searching for Keywords Search for keywords such as “battery” and “install” to find a topic. If you are using Adobe Acrobat Reader to read this document, press Ctrl+F on Windows or Command+F on Mac to begin a search. Navigating to a Topic View a complete list of topics in the table of contents. Click on a topic to navigate to that section. Printing this Document This document supports high resolution printing.
Contents Using this manual 2 Legends 2 Before Use 2 Product Profile 4 Overview 4 In the Box 4 Components 4 Installation 5 Getting Started 5 Installing the Zenmuse Z3 5 Remote Controller Controls 6 DJI GO App Controls 7 Downloading DJI GO 7 Connecting to DJI GO 7 Operating the Camera Managing your Photos and Videos Specifications 8 11 12
Product Profile Overview The Zenmuse Z3 gimbal and camera features an optical zoom lens. It provides a 3.5 optical zoom and 2x digital zoom. The Type 1/2.3 CMOS sensor supports 4K video recording and 12MP still photos. As with other DJI 3-axis gimbal systems, the Zenmuse Z3 can be mounted onto a DJI aircraft and stream live HD video to the DJI GO app. In the Box Gimbal and Camera ×1 16GB Micro SD Card ×1 Components 1 1. Gimbal Connector 2. Pan Motor 2 3. Roll Motor 4.
Installation Getting Started The Zenmuse Z3 can be used with the following DJI aerial platforms: DJI Inspire 1 series Matrice 100 Matrice 600 Supported Micro SD Cards The Zenmuse Z3 comes with a 16GB Micro SD card, but also supports Micro SD cards with a capacity of up to 64GB. We recommend using a UHS-1 Micro SD card to minimize the delay when reading and writing high resolution video data. DO NOT remove the Micro SD card from the Zenmuse Z3 when it is powered on. Installing the Zenmuse Z3 1.
3. Rotate the Gimbal Lock to the locked position. Remote Controller Controls To adjust the zoom, press the C2 Button and rotate the Left Dial. Press the Shutter Button to capture photos or the Record Button to record video. Adjust the camera’s tilt using the Left Dial. 5 1 2 4 3 [1] Left Dial Turn to adjust the camera’s tilt or pan. 6 © 2016 DJI All Rights Reserved. 1. Left Dial 2. Record Button 3. Shutter Button 4. Playback Button 5.
[2] Record Button Press to start/stop recording video. [3] Shutter Button Press to take photos. [4] Playback Button Press to view photos and videos on your Micro SD card. Press again to exit. [5] C2 Button To adjust the zoom, press the C2 Button and rotate the Left Dial. DJI GO App Controls Downloading DJI GO Search for ‘DJI GO’ on the App Store or Google Play and download the app to your mobile device. DJI GO supports iOS 8.0 (or later) or Android 4.1.2 (or later). Connecting to DJI GO 1.
Operating the Camera Camera Panel The touch interface can be used for capturing photos, recording videos and playback. Professional photography controls are also available. 1 SAFE TO FLY 2 GPS 3 P-GPS 61% 12 R 15:43 ISO 1600 1/50 F 2.8 EV 2.0 22:02 1080P 60 LOG AE 4 MENU 5 T 6 7 W 8 9 1. Live HD Video 2. Photography Configurations Display 3. AE Lock 4. Focus 5. Parameter Settings (e.g. 7. Shutter / Record Button Photo and Video Size, 8. Playback Format, White Balance 9.
Recording Videos Slide the Photo/Recording Switch to the recording video. position. Tap the button to start or stop Advanced Settings Exposure Modes Tap to choose from the following exposure modes: 1. AUTO The shutter speed and aperture are set automatically to obtain the correct exposure. 2. S (Shutter Priority) Set your desired shutter speed, while the camera chooses the aperture automatically. This mode is ideal for freezing action, creating motion blur or lowlight shots. 3.
2. Sunny / Cloudy / Incandescent / Neon Choose one of these modes if natural-looking colors cannot be achieved by setting Photo Style. 3. Custom (2000K - 10000K) Set a value between 2000K and 10000K to compensate for a specific light source. Optical Zoom Tap Buttons “T” and “W” for optical zoom.
D-LOG, D-Cinelike, None, Art, Black White, Vivid, Beach, Dream, Classic, Nostalgia Color General Histograms Supported Video Captions Supported Over Exposure Warning Supported Grid Off, Grid Line, Grid + Diagonal Center Point None, Circle, Cross, Narrow Cross, Square (No Center Point), Square (w. Center Point), Bracket (No Center Point), Bracket (w.
The camera must be powered on to access the files. Specifications General Name Zenmuse Z3 Dimensions 105×115×85 mm Weight 262 g Gimbal Gimbal Angular Vibration Range ±0.02° Mount Detachable Controllable Range Tilt: +30° to -90°, Pan: ±320° Mechanical Range Tilt: +50° to -140°, Pan: ±330°, Roll: +90° to -50° Max Controllable Speed Tilt: 120°/s, Pan: 180°/s Camera Sensor CMOS, 1/2.3" Max Pixels: 12.76 M, Effective Pixels: 12.4M Lens 3.5x Optical Zoom, 22 - 77mm Equivalent F2.
Video Repair Feature Supported Working Modes Capture, Record, Playback Still Photography Modes Single shot, Burst shooting: 3/5/7 frames, Auto Exposure Bracketing (AEB): 3/5 bracketed frames at 0.7EV bias, Timelapse Exposure Mode Auto, Manual, Shutter Exposure Compensation ±3.
DJI Support www.dji.com/support This content is subject to change. Download the latest version from http://www.dji.com/product/zenmuse-z3 ZENMUSETM is a trademark of DJI. Copyright © 2016 DJI All Rights Reserved.
ZENMUSE Z3 Quick Start Guide 快速入门指南 快速入門指南 クイックスタートガイド 퀵 스타트 가이드 Kurzanleitung Guía de inicio rápido Guide de démarrage rapide Guida di avvio rapido Snelstartgids Guia de início rápido Краткое руководство пользователя V1.2 2016.
Zenmuse Z3 EN The ZENMUSETM Z3 gimbal and camera features an optical zoom lens. It provides a 3.5 optical zoom and 2x digital zoom. The Type 1/2.3 CMOS sensor supports 4K video recording and 12MP still photos. As with other DJI 3-axis gimbal systems, the Zenmuse Z3 can be mounted onto a DJI aircraft* and stream live HD video to the DJI GO app. 1 2 3 4 5 8 7 1. Gimbal Connector 2. Pan Motor 3. Roll Motor 4. Tilt Motor 5. Micro USB Port 6. Micro SD Slot 7. Lens 8.
Installation EN 1. Remove the Gimbal Cap. 2. Rotate the Gimbal Lock on the Inspire 1 to the unlocked position. Align the white lines and insert the gimbal. 3. Rotate the Gimbal Lock to the locked position. © 2016 DJI All Rights Reserved.
Camera Controls EN Remote Controller To adjust the zoom, press the C2 Button and rotate the Left Dial. Press the Shutter Button to capture photos or the Record Button to record video. Adjust the camera’ s tilt using the Left Dial. 1. Left Dial 2. Record Button 3. Shutter Button 4. Playback Button 5. Right Dial 6. C2 Button 6 5 1 2 4 3 DJI GO App The touch interface can be used for capturing photos, recording videos and playback. Professional photography configurations are also available.
Specifications EN General Name Zenmuse Z3 Dimensions 105×115×85 mm Weight 262 g Gimbal Angular Vibration Range ±0.02° Mount Detachable Controllable Range Tilt: +30° to -90°, Pan: ±320° Mechanical Range Tilt: +50° to -140°, Pan: ±330°, Roll: +90° to -50° Max Controllable Speed Tilt: 120°/s, Pan: 180°/s Camera Sensor Lens Photo Resolutions CMOS, 1/2.3" Max Pixels: 12.76 M, Effective Pixels: 12.4 M 3.5x Optical Zoom, 22 - 77mm Equivalent F2.8 (Wide) - F5.
EN Exposure Mode Auto, Manual, Shutter Exposure Compensation ±3.
Compliance Information FCC Compliance This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. EU Compliance Statement: SZ DJI TECHNOLOGY CO.
DJI Support DJI 技术支持 DJI 技術支援 DJI サポート DJI 지원 DJI Support Asistencia técnica de DJI Assistance DJI Assistenza DJI DJI-ondersteuning Suporte DJI Техническая поддержка DJI www.dji.com/support If you have any questions about this document, please contact DJI by sending a message to DocSupport@dji.com. 如果您对说明书有任何疑问或建议，请通过以下电子邮 箱联系我们：DocSupport@dji.com。 Printed in China.
Zenmuse Z3 Release Note Date: 2017.07.10 Firmware Version: V 01.11.01.50 DJI GO app iOS V3.1.13 DJI GO app Android V3.1.8 What's New? Updated No Fly Zone Management. For increased safety, the flight is restricted to a height of 30 m and distance of 50 m when not connected or logged into the app during flight, including DJI GO and all apps compatible with DJI aircraft. Note: Make sure you restart both the aircraft and remote controller after updating them to the latest firmware.
Zenmuse Z3 Release Note Date: 2017.02.21 Firmware Version: V 1.10.1.40 DJI GO app iOS V3.1.5 DJI GO app Android V3.1.3 What's New? Optimized Flight Restriction Zone management by deleting flight restrictions for some abandoned airports. Slowed motor stopping time to three seconds during flight. Note: Firmware V1.10.1.40 is used to update the Inspire 1 series synchronously, but can only be used to update the firmware of the aircrafts, not the camera firmware. Aircraft version v1.10.1.
Zenmuse Z3 Release Note Date: 2016.11.10 Firmware Version: V 1.9.1.40 DJI GO app iOS V3.0.2 DJI GO app Android V3.0.1 What's New? Improved video transmission stability. Reduced gimbal vibration when used with the M600. Fixed issue causing gimbal to be unable to carry out self-diagnosis when powered on at certain angles. Compatible with Osmo Handle. Note: If update fails, restart and retry. http://www.dji.com/zenmuse-z3 Copyright © 2017 DJI All Rights Reserved.
ZENMUSE Z3 DISCLAIMER AND SAFETY GUIDELINES 免责声明和安全操作指引 免責聲明與安全指導方針 免責事項および安全に関するガイドライン 고지 사항 및 안전 가이드 HAFTUNGSAUSSCHLUSS UND SICHERHEITSVORSCHRIFTEN RENUNCIA DE RESPONSABILIDAD Y DIRECTRICES DE SEGURIDAD CLAUSE D'EXCLUSION DE RESPONSABILITÉ ET CONSIGNES DE SÉCURITÉ LIMITAZIONI DI RESPONSABILITÀ E DIRETTIVE SULLA SICUREZZA DISCLAIMER EN VEILIGHEIDSRICHTLIJNEN DECLARAÇÃO DE EXONERAÇÃO DE RESPONSABILIDADE E DIRETRIZES DE SEGURANÇA ЗАЯВЛЕНИЕ ОБ ОТКАЗЕ ОТ ОТВЕТСТВЕННОСТИ И РУКОВОДСТВО ПО ТЕХНИКЕ БЕЗОПАСНОСТИ V1
Disclaimer and Warning Congratulations on purchasing your new DJITM product. The information in this document affects your safety and your legal rights and responsibilities. Read this entire document carefully to ensure proper configuration before use. Failure to read and follow instructions and warnings in EN this document may result in serious injury to yourself or others, or damage to your DJI product or damage to other objects in the vicinity.
By using this product, you hereby signify that you have read this disclaimer and warning carefully and that you understand and agree to abide by the terms and conditions herein. You agree that you are solely responsible for your own conduct while using this product, and for any consequences thereof. You agree to use this product only for purposes that are proper and in accordance with all and all terms, precautions, practices, policies and guidelines DJI has made and may make available.
Compliance Information FCC Compliance This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. EU Compliance Statement: SZ DJI TECHNOLOGY CO.
DJI Support DJI 技术支持 DJI 技術支援 DJI サポート DJI 지원 DJI Support Asistencia técnica de DJI Assistance DJI Assistenza DJI DJI-ondersteuning Suporte DJI Техническая поддержка DJI www.dji.com/support If you have any questions about this document, please contact DJI by sending a message to DocSupport@dji.com. 如果您对说明书有任何疑问或建议，请通过以下电子邮 箱联系我们：DocSupport@dji.
