ZENMUSE X4S User Manual 2017.01 V1.
Searching for Keywords Search for keywords such as “battery” and “install” to find a topic. If you are using Adobe Acrobat Reader to read this document, press Ctrl+F on Windows or Command+F on Mac to begin a search. Navigating to a Topic View a complete list of topics in the table of contents. Printing this Document This document supports high resolution printing.
Contents Read Before the First Flight 2 Legends 2 Using this manual 2 Getting more information 2 Contents 3 Product Profile 4 Introduction 4 In the Box 4 Overview 4 Installation 5 Read the information below before setting up your Zenmuse X4S Supported Devices 5 5 Mounting the Zenmuse X4S to the aircraft 5 Mounting the Zenmuse X4S to the Inspire 2 5 Mechanical Range 6 Using the Remote Controller 6 DJI GO 4 App 7 Downloading 7 Launching the DJI GO 4 app 7 Camera Operation
Product Profile Introduction Featuring a 1-inch CMOS sensor and large pixels measuring 2.4μm per pixel, the Zenmuse X4S is capable of capturing 20 megapixel stills and capturing 11.6 stops of dynamic range. It can record 4K/60 H.264 and 4K/30 H.265 videos at a 100Mbps bitrate. A variety of shooting modes are available for a better shooting experience. 14 image Burst and AEB is available. The Zenmuse X4S has an 8.8mm/F2.8-11 lens, which is compact with low distortion and a field of view of 84°.
Installation Read the information below before setting up your Zenmuse X4S Supported Devices The Zenmuse X4S can be attached to the following device, and will be compatible with other DJI devices in the future. DJI Inspire 2 Mounting the Zenmuse X4S to the aircraft Mounting the Zenmuse X4S to the Inspire 2 Power off the aircraft before installation. 1. Remove the camera body cap from the Zenmuse X4S. 1 2. Press the gimbal and the camera release button on the Inspire 2.
ZENMUSE X4S User Manual Protect the Gimbal Connector 2.0 at all times. Always ensure that the Gimbal Connector 2.0 on the Inspire 2 is in the right position when mounting, otherwise the camera will not mount. DO NOT detach the Zenmuse X4S when the aircraft is powered on. Mechanical Range The 3-axis gimbal provides an incredibly stable and mobile platform for the camera system to capture completely smooth images and videos.
ZENMUSE X4S User Manual 1. Left Dial Scroll this dial to control tilt the gimbal. Scroll this dial while pressing C1 to control yaw the gimbal; Scroll this dia while pressing C2 to control tilt of the FPV. 2. Record Button Press once to start video recording. Press again to stop recording. 3. Shutter Button Press to take a photo. If burst mode is selected, the set number of photos will be taken with one press. 4.
Camera Operation Touch Interface The touch interface can be used for capturing photos, recording videos and playback. Professional photography configurations are also available. 1 READY TO GO (GPS) 2 3 74% 70% 12 P-GPS R 09:29 ISO 200 SHUTTER 1/200 F 5.6 EV 0.3 WB Auto 4 4KP30 SD TIME 20:12 5 4.07V 4.07V AF/MF AE 6 7 8 9 10 11 FPV 12 1. 2. 3. 4. 5. 6. 7.
ZENMUSE X4S User Manual 2. AEB (Auto Exposure Bracketing) Take 3 or 5 bracketed frames with ±0.7EV steps for exposure compensation. 3. Timed Shot Take photos in 2, 3, 5, 7, 10, 15, 20, 30 or 60 second intervals. Recording You can start recording in the following two ways: , and then DJI GO 4 App: Tap Shutter/Record Switch button to activate video recording mode tap the button . Tap once to start recording video, then tap again to stop recording.
ZENMUSE X4S User Manual White Balance White balance (WB) is the process of removing unrealistic color casts. Correcting white balance can help avoid the color casts, thereby improving photos under a wider range of lighting conditions. White balance can be either set into a fixed value or a dynamic value automatically. Tap“ ”-> ->Whit Balance. 1. Auto (AWB) The camera adjusts the white balance automatically. 2.
ZENMUSE X4S User Manual Specifications Center Point None, Circle, Cross, Narrow Cross, Square (No Center Point), Square (w.Center Point), Bracket(No Center Point), Bracket (w.
ZENMUSE X4S User Manual Update Firmware The firmware of the Zenmuse X4S should be updated together with the Inspire 2. Using an Inspire 2 with the Zenmuse X4S mounted as an example. Method 1: Using the DJI Assistant™ 2 1. 2. 3. 4. 5. 6. 7. Power on the Intelligent Flight Battery, and toggle the USB Mode Switch down. Connect the Inspire 2 and the PC via the USB cable (with double A ports). Launch DJI Assistant 2 and login with a DJI account. Click Inspire 2 and the firmware update button.
Sensors 1 inch CMOS Sensor Effective Pixels 20MP Image Size 3:2, 4:3, 16:9 ISO Range Photo:100-25600 Video:100-6400 Shutter Speed Mechanical Shutter Speed: 8 – 1/2000 s Electric Shutter Speed:1/2000 s -1/8000 s FOV 84° Still Photography Modes Single Shot, Multiple(3/5/7/10/14frames), AEB(3/5bracketed frames at 0.7EV bias), Timed Shot(2/3/5/7/10/15/20/30/60s) Video Recording Modes H.264 C4K: 4096×2160 23.976/24/25/29.97/47.95/50/59.94p @100Mbps 4K: 3840×2160 23.976/24/25/29.97/47.95/50/59.
DJI Support: http://www.dji.com/support This content is subject to change. Download the latest version from http://www.dji.com/zenmuse-x4s If you have any questions about this document, please contact DJI by sending a message to DocSupport@dji.com. © 2017 DJI. All Rights Reserved.
ZENMUSE X4S Quick Start Guide ᔘ䕌ڒ䬕ᠴࢄ ᔘ䕌ڒ䪭ᠴࢄ クイックスタートガイド 퀵 스타트 가이드 Kurzanleitung Guía de inicio rápido Guide de démarrage rapide Guida di avvio rapido Snelstartgids Guia de início rápido Краткое руководство пользователя V1.0 2016.
Disclaimer and Warning EN Congratulations on purchasing your new DJI™ product. The information in this document affects your safety and your legal rights and responsibilities. Read this entire document DBSFGVMMZ UP FOTVSF QSPQFS DPOmHVSBUJPO CFGPSF VTF 'BJMVSF UP SFBE BOE GPMMPX JOTUSVDUJPOT and warnings in this document may result in serious injury to yourself or others, damage to your DJI product, or damage to other objects in the vicinity.
DJI accepts no liability for damage, injury or any legal responsibility incurred directly or indirectly from the use of this product. Zenmuse X4S 5IF ;FONVTF 9 4 HJNCBM BOE DBNFSB GFBUVSFT B JODI $.04 TFOTPS TVQQPSUJOH , WJEFP SFDPSEJOH BOE VQ UP .1 TUJMM QIPUP DBQUVSF "T XJUI PUIFS %+* BYJT HJNCBM systems and 24mm (35mm equivalent) lens, the Zenmuse X4S can be mounted onto a DJI aircraft* and can stream live HD video wirelessly to the DJI GOTM 4 app. 1 2 3 6 1.
EN 2. Press the gimbal and camera release button on the Inspire 2 then rotate to remove the Gimbal Cap. 3. Align the white dot on the gimbal to the red dot on Inspire 2 and insert the gimbal. 4. Rotate the Gimbal Lock to the locked position (red dots aligned). 21 3 4 Always ensure that the DJI Gimbal Connector 2.0 on the Inspire 2 is in the right position when mounting, otherwise the camera will not mount. Always power off the aircraft before removing the gimbal camera.
DJI GO 4 App The touch interface can be used for capturing photos, recording videos and playback. 1SPGFTTJPOBM QIPUPHSBQIZ DPOmHVSBUJPOT BSF BMTP BWBJMBCMF READY TO GO (GPS) 2 3 74% 70% 12 P-GPS 4 R EN 1 5 < < 09:29 ISO SHUTTER F 200 1/200 5.6 EV WB 0.3 Auto SD TIME 4KP30 20:12 AF/MF AE 6 7 8 9 10 11 FPV 12 1. Live HD Video 2. Current Camera Settings 4QPU .FUFSJOH 'PDVT 4XJUDI "' .' 4XJUDI 5. AE Lock 6. Shutter/Record Switch .' "EKVTUNFOU JO .' .PEF 8.
EN Mount Detachable Controllable Range 1JUDI ¡ UP ¡ 1BO ¡ 3PMM ¡ Mechanical Range 1JUDI ¡ UP ¡ 1BO ¡ 3PMM ¡ UP ¡ .BY $POUSPMMBCMF "OHVMBS 4QFFE 1JUDI ¡ T 1BO ¡ T 3PMM ¡ T Camera Sensors CMOS, 1" &GGFDUJWF 1JYFMT .1 Lens ' NN NN &RVJWBMFOU NN '07 84° Photo Resolutions 3:2, 5472×3648 4:3, 4864×3648 16:9, 5472×3078 Video Resolutions H.264 $ , ¨ Q ! .
$FOUFS XFJHIUFE NFUFSJOH Spot metering (area option 12×8) AE Lock Supported Shutter Speed Mechanical Shutter: 8 – 1/2000s Electronic Shutter: 1/2000 – 1/8000s White Balance Auto, Sunny, Cloudy, Incandescent, Neon, $VTUPN , o , ISO Range 100 – 6400 (Video) 100 – 12800 (Stills) Video Captions Supported "OUJ 'MJDLFS Auto, 50Hz, 60Hz PAL/NTSC Supported EN Metering Mode Environmental Operating Temperature ¡ o ¡' UP ě Storage Temperature ¡ o ¡' UP ě 5IF
Compliance Information FCC Compliance 5IJT EFWJDF DPNQMJFT XJUI 1BSU PG UIF '$$ 3VMFT 0QFSBUJPO JT TVCKFDU UP UIF GPMMPXJOH two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. "OZ DIBOHFT PS NPEJGJDBUJPOT OPU FYQSFTTMZ BQQSPWFE CZ UIF QBSUZ SFTQPOTJCMF GPS compliance could void the user’s authority to operate the equipment.
DJI Support DJI షஃે DJI ឭ㶀ᩜᤡ DJI サポート DJI 고객지원 DJI Support Servicio de asistencia de DJI Service client DJI Assistenza DJI DJI-ondersteuning Suporte DJI Техническая поддержка DJI http://www.dji.com/support 4HU\MHJ[\YLK I`! [O ÅVVY >LZ[ >PUN :R`^VY[O :LTPJVUK\J[VY +LZPNU )\PSKPUN 56 .HV_PU :V\[O [O (]L 5HUZOHU +PZ[YPJ[ :OLUaOLU .\HUNKVUN *OPUH ݣ䕍 ੳ᷀ງܸ࣊ڢ႞ѹழሙదᬍНՃ ౝ ౭᷀ງ࣊ڢӯࡣӝᰴழӯپ᥋ 18 Ղѹ፥ӧʹᝠܸԘ᜵ऐ 14 ࡏ ߎ☚㏬᷀ 76
ݠ౧০ࠫឭ˺ద͊͵Ⴁ᫈ੋथᝬᶲឰᤰ̿ʾႃߕᥫኸ ᐏጇੈ̓᷀DocSupport@dji.com。 Printed in China. ˗ڎӿ҄ YC.BZ.S01263.02 If you have any questions about this document, please contact DJI by sending a message to DocSupport@dji.com.
