Owner's Manual

DJI Air 2S User Manual
©
2021 DJI All Rights Reserved.
37
DJI Fly
App
Customizable Button
Go to System Settings in DJI Fly and select Control to customize the function of the button. Functions
include recentering the gimbal, switching the auxiliary LED, and toggling the map and live view.
Remote Controller Alert
The remote controller sounds an alert during RTH or when the battery level is low (6% to 15%). The low
battery alert level can be cancelled by pressing the power button. The critical battery level alert (less
than 5%), however, cannot be cancelled.
Optimal Transmission Zone
The signal between the aircraft and the remote controller is most reliable when the antennas are
positioned in relation to the aircraft as depicted below.
Optimal Transmission Zone
Strong
Weak
Weak
Linking the Remote Controller
The aircraft and remote controller must be linked before using. Follow these steps to link a new remote
controller:
1. Power on the remote controller and the aircraft.
2. Launch DJI Fly.
3. In camera view, tap and select Control and Pair to Aircraft (Link).
4. Press and hold the power button of the aircraft for more than four seconds. The aircraft beeps once
indicating it is ready to link. The aircraft beeps twice indicating linking is successful. The battery level
LEDs of the remote controller will glow solid.