User Manual V1.0 2020.
Searching for Keywords Search for keywords such as “battery” and “install” to find a topic. If you are using Adobe Acrobat Reader to read this document, press Ctrl+F on Windows or Command+F on Mac to begin a search. Navigating to a Topic View a complete list of topics in the table of contents. Click on a topic to navigate to that section. Printing this Document This document supports high resolution printing.
Contents Using this Manual 2 Legend 2 Before Use 2 Download the DJI Mimo App 2 Introduction 4 Overview 4 Getting Started 5 Charging 5 Attaching the Phone 5 Using DJI OM 4 8 Button and Port Functions 8 Operating Mode 10 DJI Mimo App 11 Connecting to the DJI Mimo App 11 Camera View 12 Firmware Update 16 How to Update 16 Storage 16 Specifications 17 © 2020 DJI OSMO All Rights Reserved.
Introduction Equipped with 3-axis stabilization, DJI OM 4 turns your mobile phone into a camera that can deliver stabilized and super-smooth image. The foldable design makes DJI OM 4 convenient to transport and store, while the brand new magnetic connection for the phone means it is even easier to use. Lightweight and ergonomic, DJI OM 4 puts seamlessly smooth video creation at your fingertips. Get creative with features such as ActiveTrackTM 3.
Getting Started Charging To charge DJI OM 4, connect a USB adapter (not included) to the charging port using the power cable (included). The battery is fully charged when the battery level indicators turn off. Charging time: 2.5 hours (tested in the environment temperature of 25° C when using a 10W charger) Max runtime: 15 hours (tested with the gimbal balanced and held steadily. This value should be taken as a reference only) DJI OM 4 can be used as a power bank.
DJI OM 4 User Manual Using the Magnetic Ring Holder: Only attach the magnetic ring holder to phones that are supported by DJI OM 4. Refer to the DJI OM 4 Mobile Phone Compatibility List at www.dji.com/om-4 for more information. The sticker must be used when attaching the magnetic ring holder to a mobile phone made of glass. DO NOT attach the magnetic ring holder directly to a mobile phone made of glass. DO NOT attach the magnetic ring holder to a mobile phone case.
DJI OM 4 User Manual 2. Align the marks on the phone clamp or ring holder and the mounting plate. Attach the mobile phone to DJI OM 4. 3. Unfold DJI OM 4 and press and hold the M button to power on. Mount your mobile phone before powering on DJI OM 4. If no mobile phone is detected, DJI OM 4 will vibrate and enter standby mode. To bring it out of standby mode, press any button after mounting the mobile phone. © 2020 DJI OSMO All Rights Reserved.
Using DJI OM 4 After powering on, DJI OM 4 will enter follow mode by default. The gimbal converts joystick movements into smooth pan and tilt transitions, and reduces the impact of natural vibrations. The mobile phone can by adjusted by hand as well. Button and Port Functions M Button When Powered Off Press once: check battery level. Press and hold until it beeps once: power on. When Powered On Press once: switch between photo and video mode (this is the default setting and can be changed in DJI Mimo.
DJI OM 4 User Manual Zoom Slider Move the slider to the T position to enlarge the subject and move the slider to the W position to shrink. Push the slider once to change the zoom once. Push the slider continuously to change the zoom continuously. Trigger Press and hold to enter lock mode. In lock mode, the gimbal will not follow the handle movements. Release to exit lock mode. Press once to start or stop ActiveTrack 3.0. Press twice to recenter the gimbal. When using ActiveTrack 3.
DJI OM 4 User Manual Operating Mode The figures below depict the operation modes when using OM 4 in landscape mode. The same operation modes apply when used in portrait mode. Upright Mode Underslung Mode Side Grip Mode Low Position Mode Upright mode can be used without any further user input. In this mode, press the M button twice quickly to center the mobile phone. Rotate DJI OM 4 to the right or left by 90° to go from Upright to Side Grip mode. 10 © 2020 DJI OSMO All Rights Reserved.
DJI Mimo App Watch a live HD video feed on your mobile phone screen through the DJI Mimo app. The app also allows you to use Hyperlapse, Timelapse, ActiveTrack 3.0, DynamicZoom, Pano, and Story mode, or configure camera and gimbal settings in just a few taps. DJI MIMO DJI SUPPORT MY STORY DJI FORUM OM 4 00 56 DJI-Say hello to OM4 More 02 30 DJI-Imagination Unfolded MORE Camera View: tap to connect to DJI OM 4. Once connected, DJI Mimo enters camera view.
DJI OM 4 User Manual Camera View 1 2 3 4 5 6 7 8 S OFF OFF 1.0x 15 1/100 1/100 80 14 1.0x 80 0 0 13 PANO 10 DYNA-ZOOM SLOWMOTION VIDEO 16 9 PHOTO AUTO 11 12 1. Home : Tap to return to the home screen. 2. Gimbal Battery Level : Displays the current battery level of the gimbal. 3. Mobile Phone Battery Level : Displays the current battery level of the mobile phone. 4. Flash : Displays the flash status. 5.
DJI OM 4 User Manual seconds when facing the camera. The back camera will detect the nearest head and shoulders and start to track the subject. The front camera will detect the nearest face and start to track the subject. The differences between the head and shoulder tracking and face tracking are that head and shoulder tracking supports 360° tracking while face tracking does not. Also, the detection range of the cameras are different. The detection range between the back camera and the gesture is 0.
DJI OM 4 User Manual Photos: tap to take a single shot photo. Press and hold for burst shooting. Pano: tap to take a 3x3, 240°, or CloneMe panorama photo. Story: provides several templates for recording video. 10. Shutter Button : Tap to take a photo or to start or stop recording video. 11. Gesture Control Switch OFF : Tap to access Gesture Control settings. 12. Playback : Tap to preview photos and videos. 13. Zoom 1.
DJI OM 4 User Manual Invert Tilt Control: after enabling this feature, the tilt axis movement direction is the reverse of the previous direction. Press M Button: switch between photo and video mode or enter/exit the quick menu. The function can be set by the user. Gimbal Auto Calibration: reduces drift caused by nearby magnetic interference or human error. Before calibrating, place DJI OM 4 on a flat surface using a tripod. Do not touch the gimbal during calibration.
Firmware Update Use DJI Mimo to update the DJI OM 4 firmware. It takes approximately three minutes to complete an update. How to Update Before starting an update, make sure that the battery level is at least 15% (at least two battery level indicators illuminated). Connect DJI OM 4 to your mobile device and launch DJI Mimo. You will be prompted if a new firmware update is available. To start updating, connect the mobile device to the internet and follow the on-screen instructions.
Specifications Name DJI OM 4 Model OK100 Dimensions Unfolded: 276×120×104 mm Folded: 163×100×47 mm Weight 390 g (gimbal) 32.6 g (magnetic phone clamp) 11.4 g (magnetic ring holder) Power Consumption 1.2 W (steady and balanced status) Mechanical Range Pan: -161.2° to 172° Roll: -136.7° to 198° Tilt: -106.5° to 235.5° Max Controllable Speed 120°/s Using Magnetic Phone Clamp and Ring Holder: Weight: 230±60 g Compatible Phones Using Magnetic Phone Clamp: Diagonal: ≤ 196 mm (or ≤ 7.
This content is subject to change. Download the latest version from www.dji.com/om-4/downloads OSMO is a trademark of DJI OSMO. Copyright © 2020 DJI OSMO All Rights Reserved.
