Owners manual

Getting Started
©
2015 DJI. All Rights Reserved.
5
Getting Started
Intelligent Battery
The 980 mAh Intelligent Battery can power the Osmo for about 65 minutes.
Intelligent Battery Functions
Battery Balancing Balances the voltage of each cell during charging.
Overcurrent Protection Stops charging if the charging current is too large.
Overcharge Protection Stops charging if its voltage is too high.
Over-discharge Protection Stops discharging if its voltage is too low.
Short Circuit Protection Cuts the power supply if a short circuit is detected.
Temperature Control
Stops charging if the core temperature falls below 59°F (15°C)
or exceeds 104°F (40°C).
Battery Level Display The battery level is displayed in the DJI GO app.
Battery Specications
Model HB01-522365
Type LiPo
Capacity 980 mAh
Energy 10.8 Wh
Voltage 11.1 V
Charging Temperature 59° to 104° F (15° to 40° C)
Operating Temperature 14° to 122° F (-10° to 50° C)
Be sure to fully charge the Intelligent Battery for the rst time to activate it.
Read the user manual, Intelligent Battery Safety Guidelines before use. The user
takes full responsibility for all operations and usage.
Charging the Battery
Connect the battery charger to a power outlet using the provided cable. The LED indicator on
the battery charger will glow green.
Place the battery into the battery charger. The LED indicator will become red when charging.
It will take approximately an hour for the battery to be fully charged, at which point the LED
indicator will change from red to green.