Mavic Mini SE - Manual

20
©
2021 DJI All Rights Reserved.
DJI Mini SE User Manual
Using the Battery
Insert the battery in the battery compartment and secure the battery clamp. A clicking sound indicates
the battery is fully engaged. Make sure that the battery is fully inserted and the battery cover is secure in
place.
Checking Battery Level
Press the power button once to check the battery level.
Battery Level LEDs
: LED is on. : LED is ashing. : LED is o.
LED1 LED2 LED3 LED4
Battery Level
battery level
＞
88%
75%
＜
battery level
≤
88%
Refer to the DJI Mini SE Disclaimer and Safety Guidelines before use. Users take full
responsibility for all operations and usage.
DO NOT detach the battery when the aircraft is powering on.
Make sure that the battery is mounted firmly.
LED1
LED2
LED3
LED4
Battery Level LEDs
Power Button
Fully engagedNot engaged
Press the battery clamp and detach the battery from the battery compartment to remove it.
8. Battery Cell Damage Protection: DJI Fly displays a warning prompt when a damaged battery cell is
detected.
9. Hibernation Mode: if the battery cell voltage is lower than 3.0 V or the battery level is less than 10%,
the battery enters Hibernation mode to prevent over-discharge. Charge the battery to wake it from
hibernation.
10. Communication: information about the voltage, capacity, and current of the battery is transmitted to
the aircraft.