Instructions

Gimbal Camera

Camera and Gimbal

Camera

Prole

The Phantom 4 Advanced / Advanced+ camera uses 1-inch CMOS sensor to capture video (up to

4096×2160p at 60fps) and 20 megapixel stills. Videos can be stored in either MOV or MP4 formats.

Available picture shooting modes include burst, continuous, and time-lapse mode. A live preview of what

the camera sees can be monitored on the connected mobile device via the DJI GO 4 app.

The Phantom 4 Advanced / Advanced+ supports the capture of 4K at 60fps. Both H.265 and H.264 are

supported, with a maximum video bitrate of 100 Mbps.

The 20 megapixel photos taken by Phantom 4 Advanced / Advanced+ is the result of the application of

advanced image processing technique. A variety of shooting modes deliver a better shooting experience.

A mechanical shutter with a 1/2000 max speed eliminates rolling shutter distortion when capturing stills of

fast moving objects.

Camera Micro SD Card Slot

To store your photos and videos, insert the Micro SD card into the slot as shown below before

turning on the Phantom 4 Advanced / Advanced+. The Phantom 4 Advanced / Advanced+ comes

with a 16 GB Micro SD card and supports Micro SD cards up to 128 GB. A UHS-1 and above Micro

SD card is recommended due to their fast read and write speeds that support high-resolution video

data.

Do not remove the Micro SD card from the Phantom 4 Advanced / Advanced+ when it is

shooting.

To ensure the stability of the camera system, single video recordings are capped at 30 minutes.

Camera Data Port (Micro USB)

Turn on the Phantom 4 Advanced / Advanced+ and connect a USB cable to the Camera Data Port

to download photos and videos to a computer. The camera Micro SD card cannot be read when DJI

Assistant 2 is being used.