User manual

DJI Goggles 2 User Manual
v1.0
Contents
© 2022 DJI All Rights Reserved
16
Preparing the Motion Controller
Press the power button once to check the current
battery level.
Charge before using if the battery level is too low.
USB Power Delivery chargers are not supported.
Press once then press again and hold for two
secondstopowerthemotioncontrolleronoro.
The battery level LEDs display the power level of
the battery during charging and when in use. The
statusesoftheLEDsaredenedbelow:
LED is on.
LEDisashing.
 LEDiso.