User manual

DJI Goggles 2 User Manual
v1.0
Contents
© 2022 DJI All Rights Reserved
18
The goggles only support standard USB-C
protocols and MFI-certified Lightning cables.
Non-standard cables are not supported. If the
devices do not respond after connecting, use
a different data cable and try again.
Linking
Theaircraftmustbelinkedwiththegogglesrst,
followed by the motion controller.
2s
1. Power on the aircraft, goggles, and motion
controller.
2. Press the link button on the goggles. The goggles
will start to beep continually.
3. Press and hold the power button on the aircraft
until the battery level LEDs start to blink in
sequence.
4. Once linking is completed, the battery level LEDs of
the aircraft turn solid and display the battery level,
the goggles stop beeping, and image transmission
can be displayed normally.