DJI GOGGLES User Guide 2018.09 V1.
Searching for Keywords Search for keywords such as “battery” and “install” to find a topic. If you are using Adobe Acrobat Reader to read this document, press Ctrl+F on Windows or Command+F on Mac to begin a search. Navigating to a Topic View a complete list of topics in the table of contents. Click on a topic to navigate to that section. Printing this Document This document supports high resolution printing.
Contents Using This Manual 2 Legends 2 Read Before First Usage 2 Video Tutorials 2 Download the DJI Assistant 2 2 Contents 3 Product Profile 4 Introduction 4 At a Glance 4 Installation and Wearing 5 Usage 6 Operating Control 6 Connection Main Screen Controlling the Aircraft 13 Video Play 14 Charging the Goggles 15 7 11 Upgrading Firmware 16 DJI Assistant 2 16 DJI GO 4 App 16 Cleaning and Maint
Product Profile Introduction DJI Goggles (abbreviated as “Goggles”) are equipped with high-performance displays and an ultra-low latency video downlink for use with DJI aircraft, giving you a real-time aerial FPV (First Person View) experience.Goggles can also be used to play HD videos, bringing you an immersive high-definition viewing experience. Their intuitive and functional design makes them easy to operate using only your right hand.
Installation and Wearing 1. Insert the Headband into the slot above the Goggles body until you hear a click. Now check that it has been securely fastened. Click Press the Headband Buckle and move it in the opposite direction to release the Headband. 2. Align the lenses over your eyes and pull the Headband down. Adjust the Headband Knob until the Goggles fit snugly and comfortably on your face and head. Goggles can be worn over glasses.
Usage Operating Control [1] Power Button Press the power button once, then press it again and hold to turn the Goggles on/off. Battery level indicators will display the current battery level. Low Battery Level High [2] Battery Level Indicators When the battery is powered off, press the power button once to light up the battery level indicators to display the current battery level. The battery level indicators will also show the current battery level during charging and discharging.
DJI Goggles User Manual [4] Charging Status Indicator This indicates the current charging status. The LED will be solid red, yellow or green to reflect low, medium, and high power levels respectively. Blinking Red Solid Red Solid Yellow Solid Green Headband abnormal 0~29% 30~89% 90~100% [5] Back Button Press this to return to the previous menu, or exit the current Intelligent Flight Mode. [6] Function Button For aircraft that support focus (e.g.
DJI Goggles User Manual Standard Mode Standard Mode is suitable for both single and dual operator aircraft control. In this mode, the pilot using the remote controller can focus on flight, while the Goggles operator can view the environment in real-time FPV for more intuitive control. By moving their head, the Goggles wearer can control aircraft orientation or gimbal movement.
DJI Goggles User Manual Coach Mode Coach Mode is suitable for dual operator aircraft control. In this mode, the pilot using the remote controller can focus on flight, while the Goggles operator with a slave remote controller can view the environment in real-time FPV for more intuitive control. By moving their head, the Goggles wearer can control aircraft orientation or gimbal movement.
DJI Goggles User Manual Multiuser Mode Multiuser Mode is suitable for dual (or more) aircraft operator control. In this mode, the Goggles operators with a slave remote controller can view the environment in real-time FPV for more intuitive control. Please note that only the Goggles will display live view and that the primary Goggles only support head tracking. Remote Controller (primary slave) No live view, only support settings.
DJI Goggles User Manual Other DJI Aircraft The Goggles can also support other DJI aircraft. Ensure that the aircraft is linked with the remote controller and then connect the Goggles to the Micro USB port or the HDMI port of the remote controller. INSPIRETM 2 PHANTOM 4 Series* MAVIC AIR SPARKTM ** INSPIRE Series PHANTOM 4 PRO+ PHANTOM 4 ADVANCED+ Micro USB cable HDMI cable Support Head Tracking, Intelligent Flight Modes, and Live view. Support only Live view. Aircraft operation is not supported.
DJI Goggles User Manual 1. Aircraft Status Indicates aircraft flight status. 2. Flight Mode Indicates current flight mode. 3. Obstacle Detection Status Red bars are displayed when obstacles are close to the aircraft. Orange bars are displayed when obstacles are in detection range. 4. GPS Status Indicates GPS signal strength. 5. Remote Controller Signal Strength Indicates the strength of the remote controller signal. 6.
DJI Goggles User Manual 15. Camera Parameters and Live View Mode* Shows the setting parameters of the camera and Live View Mode. 16. Flight Attitude The triangle indicates the direction the aircraft is facing. The horizontal level indicates aircraft roll angle. The scale indicates the tilt angle of the gimbal. The arc beside the triangle indicates the yaw angle of the gimbal when Head Tracking Gimbal is enabled. 17.
DJI Goggles User Manual 1. TapFly a) Use the touch panel to enter “Intelligent Flight Mode > TapFly”. b) Move your head to control the cursor in the Goggles and then tap the touch panel to confirm the target direction and wait for the icon to appear. c) Tap again to confirm the selection and the aircraft will fly in that direction. d) Press the back button on the Goggles to exit the current target direction or TapFly. 2.
DJI Goggles User Manual Viewing Photos and Videos For an immersive viewing experience review your flight videos and photos, use your head and body movement to view panoramas, and watch HD video content through the Goggles. Flight Photos and Videos Select “Tools > Playback” to enter the playback page for flight photos and videos, or demo videos. IN-FlIGHT (GPS) FLIGHT MODE GPS Local Storage 12 Aircraft Storage 02:36 100% 60% Demo Videos VPS 2.5 m VS 2.
DJI Goggles User Manual Videos with resolutions up to 1920×1080 recorded by the aircraft can be played from "Local Storage" or "Aircraft Storage". Playback is only supported by Mavic series, Spark and Phantom 4 Pro/Advanced series aircraft. Please ensure the Micro SD card is inserted into the Goggles when downloading photos/videos. After that, you can browse them in "Local Storage".
DJI Goggles User Manual Battery Level Indicators While Charging LED1 LED2 LED3 LED4 Battery Level 0%~25% 25%~50% 50%~75% 75%~100% Fully Charged DO NOT charge the Goggles when it is powered on to ensure safety. When using a non-standard charger, the maximum output voltage must not exceed 12 V. The Goggles battery is located in the headband. You can connect the headband individually to the charger for charging. The battery is fully charged when the charging status indicator turns off.
DJI Goggles User Manual 1. Ensure all devices are powered on and that the aircraft is linked with the remote controller. 2. Connect the remote controller with the DJI GO 4 app. A prompt will appear if a new firmware upgrade is available. To start upgrading, connect a mobile device to the Internet and follow the on-screen instructions. 3. Restart all devices when the firmware upgrade is complete.
Specifications Weight (Typical) Goggles Body: 495 g Headband: 500 g Dimensions Goggles Body: 195×155×110 mm Headband (folded): 255×205×92 mm Screen Size 5 inch×2 Screen Resolution 3840×1080 (single screen: 1920×1080) Refresh Rate 60 Hz FOV 85° (single screen) Interpupillary Distance Range 58 – 70 mm Communication Frequency 2.4 GHz Max. Transmission Distance Same as the aircraft connected Live View Modes 1080p30, 720p60, 720p30 Min.
DJI Support http://www.dji.com/support This content is subject to change. Download the latest version from www.dji.com/dji-goggles If you have any questions about this document, please contact DJI by sending an email to DocSupport@dji.com. DJI is a trademark of DJI. Copyright © 2018 DJI All Rights Reserved.
