User manual
Table Of Contents
- Using This Manual
- Legends
- Read Before First Usage
- Video Tutorials
- Download the DJI Assistant 2
- Contents
- Product Profile
- Introduction
- At a Glance
- Installation and Wearing
- Usage
- Operating Control
- Connection
- Main Screen
- Controlling the Aircraft
- Video Play
- Charging the Goggles
- Upgrading Firmware
- DJI Assistant 2
- DJI GO 4 App
- Cleaning and Maintenance
- Cleaning the Goggles
- Maintenance of Lenses
- Specifications
DJI Goggles
User Manual
©
2018
DJI All Rights Reserved.
9
Only the primary remote controller can switch flight modes.
If two operators control the aircraft simultaneously, the commands from the primary
remote controller takes priority of aircraft movements (control sticks and gimbal dial). The
sauxiliary secondary remote controller only works if the primary remote controller is not
being operated for more than two seconds, whereas the primary remote controller can
always override it to regain control. The two remote controllers follow the same priority
for other commands.
Linking Method
1. Please ensure that both the aircraft and the primary remote controller are powered on and linked
together.
2. Put on the Goggles and power on.
3. Use the touch panel to enter “Tools > Settings > Linking Settings”.
4. Select “Advanced Linking >
Connect one set of Goggles” and confirm. The Goggles linking
status indicator will go solid red to wait for linking.
5. Press the Link button o
n the aircraft. Once linked, the linking status indicator will turn solid green.
6. Select “Connect Remote Controller” and confirm in Goggles.
7. Power on the auxiliary secondary remote controller and connect it with the mobile device.
8. Launch the DJI GO 4 app and enter the camera view. Press , then select “Remote Controller
Linking > Secondary Remote Controller,” for successful linking in a few seconds.
Remote Controller (primary)
DJI GO 4 App
√ Live View
√ Intelligent Flight Mode
Goggles (secondary)
√ Live View
√ Head Tracking
√ Intelligent Flight Mode
Remote Controller (auxiliary secondary)
+2 s
Can't switch ight modes.
No live view, only support settings.
Coach Mode
Coa
ch Mode is suitable for dual operator aircraft control. In this mode, the pilot using the remote
controller can focus on flight, while the Goggles operator with a secondary remote controller can
view the environment in real-time FPV for more intuitive control.
By moving their head, the Goggles wearer can control aircraft orientation or gimbal movement. They
can also control the aircraft with the auxiliary secondary remote controller that is inferior to the priority
control of the primary remote controller. Please note that only the DJI GO 4 app connected with the
primary remote controller and the Goggles can display the live view.