INSPIRE 1 PRO User Manual 2017.12 V1.
Searching for Keywords Search for keywords such as “battery” and “install” to find a topic. If you are using Adobe Acrobat Reader to read this document, press Ctrl+F on Windows or Command+F on Mac to begin a search. Navigating to a Topic View a complete list of topics in the table of contents. Click on a topic to navigate to that section. Printing this Document This document supports high resolution printing.
Contents 2 Using this manual Legends 2 Before Flight 2 Watch the video tutorials 2 Download the DJI GO app 2 Product Profile 5 Introduction 6 Feature Highlights 6 Assemble the Aircraft 6 7 Installing the Gimbal and Camera Aircraft Diagram 11 Remote Controller Diagram 11 Flight Controller 14 Flight Mode 14 Flight Status Indicator 14 Return to Home (RTH) 15 Dynamic Home Point 17 Vision Positioning System 18 Flight Recorder 20 Attaching and Detaching the Propellers 20 DJI I
INSPIRE 1 PRO User Manual Gimbal and Camera Camera Profile Status LED 39 Gimbal 40 DJI GO App 43 Camera 44 Library 48 Explore 48 Me 48 49 Flight Flight Environment Requirements 50 Flight Limits and Flight Restriction Area 50 Preflight Checklist 54 Calibrating the Compass 54 Auto Take-off and Auto Landing 55 Flight Test 56 Starting/Stopping the Motors 56 58 FAQ Appendix 4 37 38 61 Specifications 62 Intelligent Flight 66 How to Update Firmware 66 © 2017 DJI.
Product Profile This chapter describes the features of Inspire 1 Pro, instructs you to assemble the aircraft and explains the components on the aircraft and remote controllers. © 2017 DJI. All Rights Reserved.
Product Profile Introduction The Inspire 1 Pro is brand new quadcopter capable of capturing 4K video and transmitting an HD video signal (up to 5km) to multiple devices straight out of the box. Equipped with retractable landing gear, it can capture an unobstructed 360 degree view from its camera. The built-in camera has an integrated gimbal to maximize stability and weight efficiency while minimizing space. When no GPS signal is available, Vision Positioning technology provides hovering precision.
INSPIRE 1 PRO User Manual Battery must be fully charged before using it for the first time. Refer to "Charging the Intelligent Flight Battery" (P23) for more information . If If you you have have purchased purchased the the dual dual remote remote controller controller version, version, you you must mustuse usethe theprimary Master remote remote controller controller to to deactivate deactivate Travel Travel Mode. Mode.
INSPIRE 1 PRO User Manual 4. Align the two Lens Mount Indexes on the camera body and camera lens, and insert the camera lens into the body of the camera. 5. Rotate the camera lens clockwise until you hear a click. 6. Rotate the Lens Lock counterclockwise to lock it. 7. Mount the Balancing Ring (or a filter) and the Lens Hood. 8. Insert the Micro SD card. Micro-SD 6 Balancing Ring (or Filter) ck Cli 4 Lens Hood 5 7 To remove the camera lens, power off the battery and then: 1.
INSPIRE 1 PRO User Manual Filters must have a weigh 7 - 11 g, with those weighing 10 - 11 g performing the best. Outside this range, the filter will decrease gimbal performance. DJI MFT 15mm f/1.7 ASPH supports filters have a size of 46mm. The Balancing Ring must be installed on the camera lens when a filter is not used. Attach the Zenmuse X5 Ensure to power off the aircraft. 1. Rotate the Gimbal Lock to the unlocked position. 2. Align the key on the damping plate with the slot on the gimbal’s pan motor.
INSPIRE 1 PRO User Manual Attaching 1345T Quick-Release Propellers Following the steps below to attach the 1345T Quick-Release propellers. 1. Pair the propellers and motors with arrows of the same color (red or white). Propeller Lock 1 Rotate the propeller lock until the arrows are aligned and you hear a click. 2 Attach the propeller onto the motor. 3 Once again, rotate the propeller lock until you hear a click.
INSPIRE 1 PRO User Manual Aircraft Diagram [1] [1] GPS [2] Propeller (P20) [2] [3] [4] [6] [3] Motor [4] Front LED (P14) [5] [5] Landing gear [7] [8] [6] Gimbal and Camera (P37) [7] Intelligent Flight Battery (P20) [9] [10] [11] [8] Aircraft Micro-USB Port [9] Rear LED (P14) [10] Camera Micro-USB Port [11] Camera Micro-SD Card Slot (P38) [12] [13] [12] Vision Positioning Sensors (P18) [13] Aircraft Status Indicator (P15) Remote Controller Diagram [1] Antennas (P31) Relays aircraft control and
INSPIRE 1 PRO User Manual [6] Battery Level LEDs [8] Power Button Displays the current battery level. [7] Status LED Used to power on or power off the remote controller. [9] RTH LED Circular LED around the RTH button displays RTH status. Displays the power status. [16] [17] [18] [19] [10] Camera Settings Dial Turn the dial to adjust camera settings. Only functions when the remote controller is connected to a mobile device running the DJI GO app.
Aircraft This chapter describes the features of the Flight Controller, Vision Positioning System and the Intelligent Flight Battery. © 2017 DJI. All Rights Reserved.
Aircraft Flight Controller The Inspire 1 Pro’s flight controller is based on DJI flight controller with several enhancements such as new flight mode and new safe mode. Three safe modes are available: Failsafe, Return Home and Dynamic Home Point. These features ensure the safe return of your aircraft if the control signal is lost. A flight recorder stores crucial flight data for each flight. Flight Mode Three flight modes are available.
INSPIRE 1 PRO User Manual Aircraft Status Indicator Description Normal Red, Green and Yellow Flash Alternatively Power on and self-check Green and Yellow Flash Alternatively Aircraft warming up Green Flashes Slowly X2 Safe to Fly (P mode with GPS and Vision Positioning) Green Flashes Twice Safe to Fly (P mode with Vision Positioning but without GPS) Yellow Flashes Slowly Safe to Fly (A mode but No GPS and Vision Positioning) Warning Fast Yellow Flashing Remote Controller Signal Lost Slow Red Flas
INSPIRE 1 PRO User Manual Low Battery RTH The low battery level failsafe is triggered when the DJI Intelligent Flight Battery is depleted to a point that may affect the safe return of the aircraft. Users are advised to return home or land the aircraft immediately when these warnings are shown. DJI GO app will advise user to return the aircraft to the Home Point when low battery warning is triggered. Aircraft will automatically return to the Home Point if no action is taken after 10 seconds countdown.
INSPIRE 1 PRO User Manual When the critical battery level warning activates and the aircraft is descending to land automatically, you may push the throttle upward to hover the aircraft and navigate it to a more appropriate location for landing. Color zones and markers on the battery level indicator reflect estimated remaining flight time and are adjusted automatically, according to the aircraft’s current status.
INSPIRE 1 PRO User Manual There are two options for Dynamic Home Point. 1. Set the aircraft current coordinate as the new Home Point. 2. Set the remote controller’s coordinate as the new Home Point. Setting Up Dynamic Home Point Follow the steps below to setup Dynamic Home Point: 1. Connect to the mobile device and launch the DJI GO app and go to the “Camera” page. 2. Tap“ ”and select“ ”, to reset the remote controller’s coordinates as the new Home Point. 3.
INSPIRE 1 PRO User Manual Follow the steps below to use Vision Positioning: 1. Toggle the switch to “P” as shown the figure to the right: 2. Place the Inspire 1 Pro on a flat surface. Notice that the Vision Positioning system cannot work properly on surfaces without pattern variations. 3. Power on the Inspire 1 Pro. The aircraft status indicator will flash twice in green light, which indicates the Vision Positioning system is ready.
INSPIRE 1 PRO User Manual Flight Recorder Flight data is automatically stored in the internal storage device of the aircraft. User can gain access to these data through the DJI GO app. This includes flight duration, orientation, distance, aircraft status information, speed, and other parameters. Attaching and Detaching the Propellers Attaching the Propellers Refer to "Attaching Propellers" on p10 for details. Detaching the Propellers Release the propeller lock and remover the propeller.
INSPIRE 1 PRO User Manual DJI Intelligent Flight Battery Functions 1. Battery Level Display: LEDs display the current battery level. 2. Battery Life Display: LEDs display the current battery power cycle. 3. Auto-discharging Function: The battery automatically discharges to below 65% of total power when it is idle (press the power button to check battery level will cause battery to exit idle state) for more than 10 days to prevent swelling. It takes around 2 days to discharge the battery to 65%.
INSPIRE 1 PRO User Manual 2. Using the Intelligent Flight Battery in extremely low temperature environments (those with air temperatures below -10℃) is not recommended. When flying in environments with temperatures between 5℃ and -10℃, the Intelligent Flight Battery should be able to achieve the appropriate voltage levels (above 4.2 V), but it is recommended that you apply the included insulation sticker to the battery in order to prevent a rapid drop in temperatures. 3.
INSPIRE 1 PRO User Manual to check the battery life. The Battery Level Indicators will light up and/or blink as described below for 2 seconds: Battery Life LED1 LED2 LED3 LED4 Battery Life 90%~100% 80%~90% 70%~80% 60%~70% 50%~60% 40%~50% 30%~40% 20%~30% below 20% When battery life reaches 0%, it can no longer be used. For more information about the battery, launch DJI GO app and check the information under the battery tab. Charging the Intelligent Flight Battery 1.
INSPIRE 1 PRO User Manual Battery Level Indicators while Charging LED1 LED2 LED3 LED4 Battery Level 0%~25% 25%~50% 50%~75% 75%~100% Fully Charged Charging Protection LED Display The table below shows battery protection mechanisms and corresponding LED patterns.
Remote Controllers This chapter describes the features of the remote controller that includes aircraft and remote controller operations and dual remote controller mode. © 2017 DJI. All Rights Reserved.
Remote Controller Remote Controller Profile The Inspire 1 Pro Remote Controller is a multi-function wireless communication device that integrates the video downlink ground system and aircraft Remote Controller system. The video downlink and aircraft Remote Controller system operate at 2.4 GHz with maximum transmission distance of 5km. The remote controller features a number of camera functions, such as taking and previewing photos and video, and controlling gimbal motions.
INSPIRE 1 PRO User Manual Power Outlet Charger Power Button Controlling Camera Shoot videos or images and adjust camera settings via the Shutter Button, Camera Settings Dial, Playback Button and Video Recording Button on the remote control. [1] [4] [2] [3] [1] Camera Settings Dial Turn the dial to quickly adjust camera settings such as ISO and shutter speed without letting go of the remote controller. Move the dial button to left or right to view the pictures or videos in playback mode.
INSPIRE 1 PRO User Manual Stick Neutral/ mid point: Control sticks of the Remote Controller are placed at the central position. Move the Stick: The control stick is pushed away from the central position. Remote Controller (Mode 2) ( Aircraft indicates nose direction) Remarks Moving the left stick up and down changes the aircraft’s elevation. Push the stick up to ascend and down to descend. Push the throttle stick up to takeoff. When both sticks are centered, the Inspire 1 Pro will hover in place.
INSPIRE 1 PRO User Manual Flight Mode Switch Toggle the switch to select the desired flight mode. You may choose between; P mode, F mode and A mode. Figure F Flight Mode F F mode A A mode P P mode A P P mode (Positioning) : P mode works best when GPS signal is strong.
INSPIRE 1 PRO User Manual 2. Lower: The landing gear will lower to its lowest position for landing. Do not raise the landing gear when the aircraft is on the ground. Ensure the landing gear is lowered before landing. RTH button Press and hold this button to start the Return to Home (RTH) procedure. The LED around the RTH Button will blink white to indicate the aircraft is entering RTH mode. The aircraft will then return to the last recorded Home Point.
INSPIRE 1 PRO User Manual Optimal Transmission Range The signal transmission between aircraft and remote controller perform best within the range that displayed in the picture shown below: Optimal Transmission Range Strong Weak Ensure the aircraft is flying within the optimal transmission range. Adjust the distance and position between the operator and the aircraft to achieve optimal transmission performance.
INSPIRE 1 PRO User Manual Use the gimbal dial on the remote controller to control the pitch movement of the camera in the single remote controller mode, however, you cannot control the pan movement of the camera. Setting Up Dual Remote Controllers Mode Dual Remote Controllers mode is disabled by default. Users must enable this feature on the “Primary” remote controller by through the DJI GO app. Follow the steps below for setup: “Primary” Remote Controller: 1. 2. 3. 4.
INSPIRE 1 PRO User Manual Remote controller cannot link to the aircraft if the remote controller is set as “Secondary”. Meanwhile, the “Secondary” remote controller cannot control the orientation of the aircraft. Reset the remote controller to “Primary” in DJI GO app if you wish to link the remote controller to the aircraft. 2. Search the “Primary” remote controller in the surrounding area in the “Request Control” section.
INSPIRE 1 PRO User Manual Status LED Remote Controller Status Alarm — Solid Red chime The remote controller set as "Primary" but it is not connected with the aircraft. — Solid Green chime The remote controller set as "Primary" and it is connected with the aircraft. — Solid Purple D-D- — Solid Blue D-D- The remote controller set as "Secondary" but it is not connected with the aircraft. chime Slow Blinking Red D-D-D......
INSPIRE 1 PRO 4. The remote controller is ready to link. The Remote Controller Status Indicator blinks blueUser and Manual "beep" 4. The remote controller is ready to link. The Remote Controller Status Indicator blinks blue and "beep" sound is emitted. 4. The remote controller is ready to link.
INSPIRE 1 PRO User Manual Remote Controller Compliance Version The remote controller is compliant with both CE and FCC requirements. Used with the DJI Focus DJI Focus is fully compatible with the Zenmuse X5 series gimbal and camera. No calibration is required when using the Focus with the Zenmuse X5 camera.
Gimbal and Camera This chapter provides the technical specifications of the camera and explains the working mode of the gimbal. © 2017 DJI. All Rights Reserved.
Camera and Gimbal Camera Profile The Zenmuse X5 offers advanced photographers a high-performance, robust gimbal and camera system with an M4/3 interchangeable lens. The Type 4/3 CMOS sensor supports video recording in 4K and 16MP still photos. The Zenmuse X5 lens kit comes with the DJI MFT 15mm f/1.7 ASPH that provides a 72 degree field of view and a manually adjustable f/1.7-f/16 aperture range. The camera can shoot burst, AEB or time-lapse in JPEG and DNG RAW, and output video in MP4 and MOV formats.
INSPIRE 1 PRO User Manual Power on the aircraft before attempting to download the files. Status LED The Status LED describes the working status of the camera. Status LED Status LED Camera Status Solid Green Powered on; system is on standby. Blinks Green quickly (0.1 on, 0.2s off) System is warming up. Blinks Green once (0.2s off) Taking a single photo. Blinks Green 3 times (0.2s on, 0.2s off) Burst shooting 3 to 5 photos. Blinks Red slowly (0.8s on, 0.8s off) Recording video.
INSPIRE 1 PRO User Manual Gimbal Gimbal Profile The 3-axis Gimbal provides a steady platform for the attached camera, allowing you to capture stabilized images and video. The Gimbal can tilt the camera up to 120 degrees and rotate 360 degrees. +30° 0° -320° -90° +320° Use the gimbal dial on the remote controller to control pitch movement of the camera by default. Note that you cannot control the pan motion of the camera by default.
INSPIRE 1 PRO User Manual RC Control Setting Remote Control Calibration Stick Mode Default stick mode is Mode 2, changing stick modes alters the way the aircraft is controlled. Do not change unless familiar with your new mode. C1 Gimbal Pitch/Yaw C2 Reset gimbal yaw You can customize the C1 and C2 buttons on the back of the remote controller. Linking Remote Controller Press C1 or C2 button to switch from pitch mode to yaw mode. You may use the gimbal dial to pan the gimbal under yaw mode.
INSPIRE 1 PRO User Manual Gimbal Operation Modes Three Gimbal operation modes are available. Switch between the different operation modes on the Camera page of the DJI GO App. Note that your mobile device must be connected to the remote controller for changes to take effect. Refer to the table below for details: Pitch Pan Roll Follow Mode The angle between Gimbal’s orientation and aircraft’s nose remains constant at all times.
DJI GO App This chapter describes the four main GUI of the DJI GO app. © 2017 DJI. All Rights Reserved.
DJI GO App The DJI GO app is a new mobile app designed specifically for the Inspire 1 Pro. Use this app to control the gimbal, camera and other features of your flight system. The app also comes with Map, Store a User Center, for configuring your aircraft and sharing your content with friends. It is recommended that you use a tablet for the best experience.
INSPIRE 1 PRO User Manual [1] Flight Mode : The text next to this icon indicates the current flight mode. Tap to configure the MC (Main Controller) Settings. These settings allow you to modify flight limits and set the gain values. [2] GPS Signal Strength : This icon shows the current strength of GPS signals. Green bars indicate adequate GPS strength. [3] System Status : This icon indicates the current aircraft system status and GPS signal strength.
INSPIRE 1 PRO User Manual 4. Custom Sharpness: -3 to +3 Contrast: -3 to +3 Saturation: -3 to +3 MENU: White Balance ->White Balance to choose from the following modes: Tap MENU -> 1. Auto The camera adjusts the white balance automatically. 2. Sunny / Cloudy / Incandescent / Neon Choose one of these modes if natural-looking colors cannot be achieved through photo styles. 3. Custom (2000K~10000K) Set a value between 2000K and 10000K to compensate for a specific light source.
INSPIRE 1 PRO User Manual : Taking Photos Slide the Photo/Video Switch to the position. Tap the button or the shutter button on the remote controller to take a single photo. Choose from one of the shooting modes by tapping “MENU” -> -> Photo. 1. Burst Mode Take 3, 5, or 7 shots in a row. 2. AEB (Auto Exposure Bracketing) Take 3 or 5 bracketed frames with ±0.7EV steps for exposure compensation. 3. Time-lapse Take photos in 5, 7, 10, 20 or 30 second intervals.
INSPIRE 1 PRO User Manual [11] Aircraft Distance : The distance of the aircraft from the Home Point. When the aircraft is near the ground, this icon will change to to display the height the Vision Position System’s sensors from the ground. [12] Flight Telemetry Flight attitude is indicated by the flight attitude icon. (1) The red arrow shows which direction the aircraft is facing. (2) Light blue and dark blue areas indicate pitch.
Flight This chapter describes the flight safety and flight restrictions. © 2017 DJI. All Rights Reserved.
Flight Once pre-flight preparation is complete, it is recommended to use the flight simulator to learn how to fly safely. Ensure that all flights are carried out in a suitable location. Flight Environment Requirements 1. Do not use the aircraft in severe weather conditions. These include wind speed exceeding 10m/s , snow, rain and smog. 2. Only fly in open areas. Tall buildings and steel structures may affect the accuracy of the on-board compass and GPS signal. 3.
INSPIRE 1 PRO User Manual GPS Signal Strong Blinking Green Flight Limits DJI GO App Aircraft Status Indicator Max Height Flight altitude must be under the set height. Warning: Height limit reached. None. Max Radius Flight distance must be within the max radius. Warning: Distance limit reached.
INSPIRE 1 PRO User Manual 1640 feet Airports 66 feet 1 mile R1 R2 320 feet 1640 feet 66 feet 1 mile 320 feet R1 R2 Restricted Areas: (1) Restricted Areas do not have a flight altitude restriction. (2) R around the designated Restricted Area is a Take-off Restricted area. Aircraft cannot takeoff within this zone. The value of R varies depending on the definition of the Restricted Area. (3) A “warning zone” has been set around each Restricted Area. When the aircraft is within 0.
INSPIRE 1 PRO User Manual GPS Signal Strong Zone No-fly Zone Restrictedaltitude flight zone Warning zone Free zone Blinking Green Aircraft Status Indicator Restriction DJI GO App Prompt Motors will not start. Warning: You are in a No-fly zone. Take off prohibited. If the aircraft enters the restricted area in A mode but P mode activates the aircraft will automatically descend to land then stop its motors after landing. Warning: You are in a No-fly zone, automatic landing has begun.
INSPIRE 1 PRO User Manual Preflight Checklist 1. 2. 3. 4. 5. 6. Remote controller, aircraft battery, and mobile device are fully charged. Propellers are mounted correctly and firmly. Micro-SD card has been inserted if necessary. Gimbal is functioning as normal. Motors can start and are functioning as normal. DJI GO app connected to the aircraft. Calibrating the Compass Only calibrate the compass when the DJI GO app or the status indicator prompt you to do so.
INSPIRE 1 PRO User Manual 3. Hold the aircraft vertically with nose pointing downward, and rotate it 360 degrees around the center axis. Recalibrate the compass if the Aircraft Status Indicator show solid red. If the Aircraft Status Indicator blinks red and yellow after the calibration, move your aircraft to a different location to carry out compass calibration. Calibrate the compass before each flight. Launch DJI GO App, follow the on-screen instruction to calibrate the compass. When to Recalibrate 1.
INSPIRE 1 PRO User Manual Auto-Landing Use auto-landing to land your aircraft automatically if the Aircraft Status Indicator displays blinking green. Follow the steps below to use auto-landing: 1. Ensure the aircraft is in “P” mode. 2. Check the landing area condition before tapping “ ”, to perform landing. 3. Aircraft lowers the landing gear and proceed to land automatically. Landing gear will automatically raise when the aircraft reaches an altitude of 1.
INSPIRE 1 PRO User Manual 6. Shoot photos and videos using the DJI GO app. 7. To land, hover over a level surface and gently pull down on the throttle slowly to descend. 8. After landing, execute the CSC command or hold the throttle at its lowest position for 3 seconds or more until the motors stop. 9. Turn off the Intelligent Flight Battery first, followed by the Remote Controller. When the Aircraft Status Indicator blinks yellow rapidly during flight, the aircraft has entered Failsafe mode.
FAQ 58 © 2017 DJI. All Rights Reserved.
Troubleshooting (FAQ) 1. How can I put a GoPro camera on the Inspire 1 Pro? The Inspire 1 Pro does not currently support GoPro attachments. The gimbal is designed to hold DJI cameras only. 2. When will ground station functionality be available? The Inspire 1 Pro does not currently support ground station. Ground station will be available with future firmware updates. 3.
INSPIRE 1 PRO User Manual 14. What flight controller does the Inspire 1 Pro use? The Inspire 1 Pro uses its own new flight controller. 15. Which motors and propellers does the Inspire 1 Pro come with? The Inspire 1 Pro uses 3510H motors and 1345T propellers. 16. Aircraft frame arm joints appear loosen, is that normal? The space of the joins shown in the below figure is normal and it will not affect the performance of aircraft, do not adjust the position of the screws on your own. 17.
Appendix © 2017 DJI. All Rights Reserved.
Appendix Specifications Aircraft Model T600 Weight 2870 g (Battery and propellers included, Zenmuse X5 excluded) 3400 g (Battery, propellers and Zenmuse X5 included) Max Takeoff Weight 3500 g Hovering Accuracy (P Mode) Vertical: 0.5 m Horizontal: 2.
INSPIRE 1 PRO User Manual Sensor Type 4/3 CMOS sensor Effective Pixels 16 M Max Resolution 4608x3456 ISO Range 100-25600 Electronic Shutter Speed 8 s-1/8000 s Field of View DJI MFT 15mm f/1.7 ASPH 72° Still Photography Modes Single shot Burst shooting:3/5/7 frames Auto Exposure Bracketing (AEB):3/5 bracketed frames at 0.7EV bias Timelapse (3/5/7/10/20/30/60 sec) Video Resolution UHD:4K (4096×2160) 24/25p, 4K (3840×2160) 24/25/30p, 2.
INSPIRE 1 PRO User Manual Max Transmitting Distance FCC Compliant: 3.1 miles (5 km); CE Compliant: 2.1 miles (3.5 km) (unobstructed, free of interference) EIRP 10 dBm@900 MHz, 13 dBm@5.8 GHz, 20 dBm@2.
INSPIRE 1 PRO User Manual Storage Temperature Less than 3 months: -4° to 113° F (-20° to 45° C) More than 3 months: 72° to 82° F (22° to 28° C) Charging Temperature 32° to 104° F (0° to 40° C) Max Charging Power 180 W Max Flight Time Approx. 18 minutes Vision Positioning Velocity Range < 8 m/s @altitude 6.56 feet (2 m) Altitude Range 0.16 - 16.4 feet (5-500 cm) Operating Environment Surfaces with clear patterns and adequate lighting (> 15 lux) Operating Range < 9.
INSPIRE 1 PRO User Manual Intelligent Flight Intelligent Flight mode includes Course Lock, Home Lock, Point of Interest (POI), Follow Me and Waypoints features to assist users to create professional shoots during the flight. Course Lock and Home Point lock helps to lock the orientation of aircraft so that the user can focus more on other operations. Point of Interest, Follow Me and Waypoints mode enable aircraft to fly automatically according to the preset flight maneuvers.
INSPIRE 1 PRO User Manual 3. Check the upgrade status by opening the “.txt” file that is automatically generated after the update. The update is successful if the text “result: successful” is in the document. Try upgrading the firmware again if the text “result: failed” is found or the camera status indicator shows solid red. Please note that firmware update may reset various Main Controller Settings, such as the RTH Altitude and Maximum Flight Distance, to factory defaults.
INSPIRE 1 PRO User Manual Updating Intelligent Flight Battery Firmware The Intelligent Flight Battery is upgraded during the aircraft firmware upgrade process. It is recommended to keep the upgrade package files in your SD card. The upgrade will start automatically after power cycling the aircraft. Ensure there is only one firmware package file stored on your SD card. Only storage devices that are formatted for FAT32 and exFAT file systems are supported for aircraft and remote controller firmware updates.
This content is subject to change. Download the latest version from www.dji.com/product/inspire-1-pro-and-raw If you have any questions about this document, please contact DJI by sending a message to DocSupport@dji.com. © 2017 DJI. All Rights Reserved.
