User manual
Table Of Contents
Remote Controller
RemoteControllerProle
The Inspire 1 Pro Remote Controller is a multi-function wireless communication device that integrates the
video downlink ground system and aircraft Remote Controller system. The video downlink and aircraft
Remote Controller system operate at 2.4 GHz with maximum transmission distance of 5km. The remote
controller features a number of camera functions, such as taking and previewing photos and video, and
controlling gimbal motions. The remote controller is powered by a 2S rechargeable battery. The current
battery level is displayed by LEDs on the front panel of the remote control.
Compliance Version: The Remote Controller is compliant with both CE and FCC regulations.
Operating Mode: Control can be set to Mode 1, Mode 2.
Mode 1: The right stick serves as the throttle.
Mode 2: The left stick serves as the throttle.
Do not operate more than 3 aircrafts within in the same area (size equivalent to a soccer eld)
to prevent transmission interference.
To ensure the connection between the aircraft and remote controller, the Slave remote controller
1. When powered off, press the Power Button once and the Battery Level LEDs will display the current
2. Then, press and hold the Power Button to power on the remote controller.
3. The Remote Controller will beep when it powers on. The Status LED will blink green (secondary
remote controller blinks solid purple) rapidly, indicating that the remote controller is linking to the
aircraft. The
4. Repeat step 2 to power off the remote controller after finish using it.
Charge the remote controller via supplied charger.
To ensure the connection between the aircraft and remote controller, the secondary remote
controller is recommended to use in less interference environment.
26
©
2017 DJI. All Rights Reserved.
RemoteControllerProle
The Inspire 1 Pro Remote Controller is a multi-function wireless communication device that integrates the
video downlink ground system and aircraft Remote Controller system. The video downlink and aircraft
Remote Controller system operate at 2.4 GHz with maximum transmission distance of 5km. The remote
controller features a number of camera functions, such as taking and previewing photos and video, and
The Remote Controller is compliant with both CE and FCC regulations.
Control can be set to Mode 1, Mode 2.
Do not operate more than 3 aircrafts within in the same area (size equivalent to a soccer eld)
To ensure the connection between the aircraft and remote controller, the Slave remote controller
Remote Controller Operations
Powering On And Off The Remote Controller
The Inspire 1 Pro remote controller is powered by a 2S rechargeable battery with a capacity of 6000mAh.
The battery level is indicated by the Battery Level LEDs on the front panel. Follow the steps below to
power on your remote controller:
1. When powered off, press the Power Button once and the Battery Level LEDs will display the current
battery level.
2. Then, press and hold the Power Button to power on the remote controller.
3. The Remote Controller will beep when it powers on. The Status LED will blink green (secondary
remote controller blinks solid purple) rapidly, indicating that the remote controller is linking to the
aircraft. The Status LED will show a solid green light when linking is completed.
4. Repeat step 2 to power off the remote controller after finish using it.
Charging Remote Controller
Charge the remote controller via supplied charger.