User manual

32
©
2017 DJI. All Rights Reserved.
INSPIRE 1 PRO User Manual
Use the gimbal dial on the remote controller to control the pitch movement of the camera in the
single remote controller mode, however, you cannot control the pan movement of the camera.
S
etting Up Dual Remote Controllers Mode
Dual Remote Controllers mode is disabled by default. Users must enable this feature on the “Primary”
remote controller by through the DJI GO app. Follow the steps below for setup:
“Primary” Remote Controller:
1. Connect the remote controller to your mobile device and launch the DJI GO app.
2. Go to the Camera page, and tap
to enter the remote controller settings window.
3. Tap “Set RC Status” to enable Primary-and-Secondary mode.
4. Select “Primary” in the “Set RC Status” section to set the remote controller as “Primary” remote controller.
RC Control Settings
Set RC Status
Secondary RC List
Primary and Secondary
RC Settings
Primary
OFF
RC Name Connection Password
T12254 1234
Secondary
Primary
OFF
Secondary
RC Control Setting
Set RC Status
RC Name
Search for Primary Controller
Request Control
Primary RC List
Primary and Secondary
RC Settings
S88642
5. Enter the connection password for the “Secondary” remote controller.
“Secondary” Remote Controller:
1. Tap “Search for Primary Controller” to search the “Primary” remote controller.