User manual

68
©
2017 DJI. All Rights Reserved.
INSPIRE 1 PRO User Manual
Updating Intelligent Flight Battery Firmware
The Intelligent Flight Battery is upgraded during the aircraft rmware upgrade process. It is recommended
to keep the upgrade package files in your SD card. The upgrade will start automatically after power
cycling the aircraft.
Ensure there is only one rmware package le stored on your SD card.
Only storage devices that are formatted for FAT32 and exFAT le systems are supported for
aircraft and remote controller rmware updates.
Ensure the internet connection of your mobile device is stable when downloading the rmware
update package.
Turn on Airplane Mode on your mobile device before updating the rmware, as any incoming
calls may disrupt the update process.
Do not perform rmware update while the aircraft is still ying in the air. Only carry out rmware
update when the aircraft is landed.
Be sure to update the remote controller’s rmware to the latest version after you upgrade the
aircraft’s rmware.
The remote controller may become unlinked from the aircraft after updating. Re-link the remote
controller and aircraft.
Conrm the update results based on the blinking pattern of camera status indicator or gimbal
sound. It is normal for the aircraft to sound or the LED to blink during the update process.
DJI incorporates HDMI
TM
technology.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI
Logo are trademarks or registered trademarks of HDMI Licensing LLC in the
United States and other countries.