INSPIRE User Manual V1.0 2016.
Searching for Keywords Search for keywords such as “battery” and “install” to find a topic. If you are using Adobe Acrobat Reader to read this document, press Ctrl+F on Windows or Command+F on Mac to begin a search. Navigating to a Topic View a complete list of topics in the table of contents. Click on a topic to navigate to that section. Printing this Document This document supports high resolution printing. 2 © 2016 DJI. All Rights Reserved.
Using this manual Legends Warning Important Hints and Tips Reference Before Flight The following tutorials and manuals have been produced to ensure you to make full use of your Inspire 1 RAW. 1. In the Box 2. Safety Guidelines and Disclaimer 3. Quick Start Guide 4. Intelligent Flight Battery Safety Guidelines 5. User Manual Watching all the tutorial videos and reading the Disclaimer before flight is recommended. Afterwards, prepare for your first flight by using the Quick Start Guide.
Contents Using this manual Legends 3 Before Flight 3 Watch the Video Tutorials 3 Download the DJI GO app 3 Product Profile Introduction 7 Feature Highlights 7 Assemble the Aircraft 7 Installing the Gimbal and Camera 8 Aircraft Diagram 12 Remote Controller Diagram 12 Aircraft Flight Controller 15 Flight Mode 15 Flight Status Indicator 15 Return to Home (RTH) 16 Dynamic Home Point 18 Vision Positioning System 19 Flight Recorder 21 Attaching and Detaching the Propellers 21
INSPIRE RAW User Manual Read the information below before setting up your Zenmuse X5R 40 Installing the Camera Lens 41 Camera Panel 47 Basic Shooting 47 Advanced Settings 48 Managing your Photos and Videos 50 DJI CineLight Installing DJI CineLight 52 Accessing your Files 53 Post-Processing with DJI CineLight 53 DJI GO App Equipment 59 Editor 63 Skypixel 63 Me 63 Flight Flight Environment Requirements 65 Flight Limits and Flight Restriction Area 65 Preflight Checkl
Product Profile This chapter describes the features of Inspire 1 RAW, instructs you to assemble the aircraft and explains the components on the aircraft and remote controllers. 6 © 2016 DJI. All Rights Reserved.
Product Profile Introduction The Inspire 1 RAW is brand new quadcopter capable of capturing 4K video and transmitting an HD video signal (up to 5 km) to multiple devices straight out of the box. Equipped with retractable landing gear, it can capture an unobstructed 360 degree view from its camera. The built-in camera has an integrated gimbal to maximize stability and weight efficiency while minimizing space. When no GPS signal is available, Vision Positioning technology provides hovering precision.
INSPIRE RAW User Manual Battery must be fully charged before using it for the first time. Refer to "Charging the Intelligent Flight Battery" (P24) for more information . If you have purchased the dual remote controller version, you must use the Master remote controller to deactivate Travel Mode. Refer to "Setting Up Dual Remote Controllers Mode" (P32) section for more information about Master remote controller. Be sure to remove the gimbal from the aircraft before switch from Landing Mode to Travel Mode.
INSPIRE RAW User Manual 8. Insert the Micro SD card and the X5R SSD. 9 8 To remove the camera lens, power off the battery and then: 1. While holding down the Lens Release Button, rotate the Lens Lock clockwise to unlock it. 2. While holding down the Lens Release Button, rotate the camera lens counterclockwise to detach it. A B Lens Release Button It is recommended to wrap a dust cover around the lens to prevent contamination. DJI produces dedicated dust covers for the DJI MFT 15mm f/1.
INSPIRE RAW User Manual Filters must have a weigh 7 - 11 g, with those weighing 10 - 11 g performing the best. Outside this range, the filter will decrease gimbal performance. DJI MFT 15mm f/1.7 ASPH supports filters have a size of 46mm. The Balancing Ring must be installed on the camera lens when a filter is not used. Attach the Zenmuse X5R Power off the aircraft. 1. Rotate the Gimbal Lock to the unlocked position. 2.
INSPIRE RAW User Manual Attaching 1345T Quick-Release Propellers Following the steps below to attach the 1345T Quick-Release propellers. 1. Pair the propellers and motors with arrows of the same color (red or white). Propeller Lock 1 Rotate the propeller lock until the arrows are aligned and you hear a click. 2 Attach the propeller onto the motor. 3 Once again, rotate the propeller lock until you hear a click.
INSPIRE RAW User Manual Aircraft Diagram [1] GPS [1] [2] Propeller (P11) [2] [3] [4] [6] [3] Motor [4] Front LED (P15) [5] [5] Landing gear [7] [8] [6] Gimbal and Camera (P39) [10] [7] Intelligent Flight Battery (P21) [9] [8] Aircraft Micro-USB Port [9] Rear LED (P15) [10] X5R SSD [11] [11] Vision Positioning Sensors (P19) [12] [12] Aircraft Status Indicator (P16) Remote Controller Diagram [1] Antennas (P32) Relays aircraft control and video signal.
INSPIRE [6] Battery Level LEDs [8] Power Button Displays the current battery level. [7] Status LED RAW User Manual Used to power on or power off the remote controller. [9] RTH LED Displays the connection status. Circular LED around the RTH button displays RTH status. [16] [17] [18] [19] [10] Camera Settings Dial Turn the dial to adjust camera settings. Only functions when the remote controller is connected to a mobile device running the DJI GO app.
Aircraft This chapter describes the features of the Flight Controller, Vision Positioning System and the Intelligent Flight Battery. 14 © 2016 DJI. All Rights Reserved.
Aircraft Flight Controller The Inspire 1 RAW’s flight controller is based on DJI flight controller with several enhancements such as new flight mode and new safe mode. Three safe modes are available: Failsafe, Return Home and Dynamic Home Point. These features ensure the safe return of your aircraft if the control signal is lost. A flight recorder stores crucial flight data for each flight. Flight Mode Three flight modes are available.
INSPIRE RAW User Manual Aircraft Status Indicator Description Normal Alternatively Red, Green and Yellow Flash Power on and self-check Green and Yellow Flash Alternatively Aircraft warming up Green Flashes Slowly X2 Safe to Fly (P mode with GPS and Vision Positioning) Green Flashes Twice Safe to Fly (P mode with Vision Positioning but without GPS) Yellow Flashes Slowly Safe to Fly (A mode but No GPS and Vision Positioning) Warning Fast Yellow Flashing Remote Controller Signal Lost Slow Red Flas
INSPIRE RAW User Manual Low Battery RTH The low battery level failsafe is triggered when the DJI Intelligent Flight Battery is depleted to a point that may affect the safe return of the aircraft. Users are advised to return home or land the aircraft immediately when these warnings are shown. DJI GO app will advise user to return the aircraft to the Home Point when low battery warning is triggered. Aircraft will automatically return to the Home Point if no action is taken after 10 seconds countdown.
INSPIRE RAW User Manual When the critical battery level warning activates and the aircraft is descending to land automatically, you may push the throttle upward to hover the aircraft and navigate it to a more appropriate location for landing. Color zones and markers on the battery level indicator reflect estimated remaining flight time and are adjusted automatically, according to the aircraft’s current status.
INSPIRE RAW User Manual There are two options for Dynamic Home Point. 1. Set the aircraft current coordinate as the new Home Point. 2. Set the remote controller’s coordinate as the new Home Point. Setting Up Dynamic Home Point Follow the steps below to setup Dynamic Home Point: 1. Connect to the mobile device and launch the DJI GO app and go to the “Camera” page. 2. Tap“ ”and select“ ”, to reset the remote controller’s coordinates as the new Home Point. 3.
INSPIRE RAW User Manual Follow the steps below to use Vision Positioning: 1. Toggle the switch to “P” as shown the figure to the right: 2. Place the Inspire 1 RAW on a flat surface. Notice that the Vision Positioning system cannot work properly on surfaces without pattern variations. 3. Power on the Inspire 1 RAW. The aircraft status indicator will flash twice in green light, which indicates the Vision Positioning system is ready.
INSPIRE RAW User Manual Keep the animals away from the aircraft when Vision Positioning system is activated. The sonar sensor emits high frequency sound that is only audible to some animals. Flight Recorder Flight data is automatically stored in the internal storage device of the aircraft. User can gain access to these data through the DJI GO app. This includes flight duration, orientation, distance, aircraft status information, speed, and other parameters.
INSPIRE RAW User Manual DJI Intelligent Flight Battery Functions 1. Battery Level Display: LEDs display the current battery level. 2. Battery Life Display: LEDs display the current battery power cycle. 3. Auto-discharging Function: The battery automatically discharges to below 65% of total power when it is idle (press the power button to check battery level will cause battery to exit idle state) for more than 10 days to prevent swelling. It takes around 2 days to discharge the battery to 65%.
INSPIRE RAW User Manual 2. Using the Intelligent Flight Battery in extremely low temperature environments (those with air temperatures below -10℃) is not recommended. When flying in environments with temperatures between 5℃ and -10℃, the Intelligent Flight Battery should be able to achieve the appropriate voltage levels (above 4.2 V), but it is recommended that you apply the included insulation sticker to the battery in order to prevent a rapid drop in temperatures. 3.
INSPIRE RAW User Manual Battery life The battery life indicates how many more times the battery can be discharged and recharged before it must be replaced. When the battery is powered off, press and hold the Power Button for 5 seconds to check the battery life.
INSPIRE RAW User Manual Battery Level Indicators while Charging LED1 LED2 LED3 LED4 Battery Level 0%~25% 25%~50% 50%~75% 75%~100% Fully Charged Charging Protection LED Display The table below shows battery protection mechanisms and corresponding LED patterns.
Remote Controllers This chapter describes the features of the remote controller that includes aircraft and remote controller operations and dual remote controller mode. 26 © 2016 DJI. All Rights Reserved.
Remote Controller Remote Controller Profile The Inspire 1 RAW Remote Controller is a multi-function wireless communication device that integrates the video downlink ground system and aircraft Remote Controller system. The video downlink and aircraft Remote Controller system operate at 2.4 GHz with maximum transmission distance of 5 km. The remote controller features a number of camera functions, such as taking and previewing photos and video, and controlling gimbal motions.
INSPIRE RAW User Manual Power Outlet Charger Power Button Controlling Camera Shoot videos or images and adjust camera settings via the Shutter Button, Camera Settings Dial, Playback Button and Video Recording Button on the remote controller. [1] [4] [2] [3] [1] Camera Settings Dial Turn the dial to quickly adjust camera settings such as ISO and shutter speed without letting go of the remote controller. Move the dial button to left or right to view the pictures or videos in playback mode.
INSPIRE RAW User Manual Stick Neutral/ mid point: Control sticks of the Remote Controller are placed at the central position. Move the Stick: The control stick is pushed away from the central position. Remote Controller (Mode 2) ( Aircraft indicates nose direction) Remarks Moving the left stick up and down changes the aircraft’s elevation. Push the stick up to ascend and down to descend. Push the throttle stick up to takeoff. When both sticks are centered, the Inspire 1 RAW will hover in place.
INSPIRE RAW User Manual Flight Mode Switch Toggle the switch to select the desired flight mode. You may choose between; P mode, F mode and A mode. Figure F Flight Mode F F mode A A mode P P mode A P P mode (Positioning) : P mode works best when GPS signal is strong.
INSPIRE RAW User Manual 2. Lower: The landing gear will lower to its lowest position for landing. Do not raise the landing gear when the aircraft is on the ground. Ensure the landing gear is lowered before landing. RTH button Press and hold this button to start the Return to Home (RTH) procedure. The LED around the RTH Button will blink white to indicate the aircraft is entering RTH mode. The aircraft will then return to the last recorded Home Point.
INSPIRE RAW User Manual Optimal Transmission Range The signal transmission between aircraft and remote controller perform best within the range that displayed in the picture shown below: Optimal Transmission Range Strong Weak Ensure the aircraft is flying within the optimal transmission range. Adjust the distance and position between the operator and the aircraft to achieve optimal transmission performance.
INSPIRE RAW User Manual Use the gimbal dial on the remote controller to control the pitch movement of the camera in the single remote controller mode, however, you cannot control the pan movement of the camera. Setting Up Dual Remote Controllers Mode Dual Remote Controllers mode is disabled by default. Users must enable this feature on the “Master” remote controller by through the DJI GO app. Follow the steps below for setup: “Master” Remote Controller: 1. 2. 3. 4.
INSPIRE RAW User Manual Remote controller cannot link to the aircraft if the remote controller is set as “Slave”. Meanwhile, the “Slave” remote controller cannot control the orientation of the aircraft. Reset the remote controller to “Master” in DJI GO app if you wish to link the remote controller to the aircraft. 2. Search the “Master” remote controller in the surrounding area in the “Request Control” section.
INSPIRE Status LED Alarm RAW User Manual Remote Controller Status — Solid Red chime The remote controller set as "Master" but it is not connected with the aircraft. — Solid Green chime The remote controller set as "Master" and it is connected with the aircraft. — Solid Purple D-D- — Solid Blue D-D- The remote controller set as "Slave" but it is not connected with the aircraft. chime Slow Blinking Red D-D-D...... The remote controller set as "Slave" and it is connected with the aircraft.
INSPIRE RAW User Manual 4. The remote controller is ready to link. The Remote Controller Status Indicator blinks blue and "beep" sound is emitted. RC Control Setting Remote Control Calibration Stick Mode Searching for aircraft frequency, Default stick mode is Mode 2, changingtimeout stick modes alters the way the aircraft is controlled. in 54 seconds Do not change unless familiar with your new mode.
INSPIRE RAW User Manual Used with the DJI Focus DJI Focus is fully compatible with the Zenmuse X5R series gimbal and camera. No calibration is required when using the Focus with the Zenmuse X5R camera. Connection To allow communication between the two devices, connect the communication port on the Focus remote controller to the CAN Bus port on the Inspire 1 remote controller using the dedicated CAN Bus cable. Ensure that the Zenmuse X5R camera is set in AF mode.
Gimbal and Camera This chapter provides the technical specifications of the camera and explains the working mode of the gimbal. 38 © 2016 DJI. All Rights Reserved.
Gimbal and Camera Gimbal and Camera Overview The Zenmuse X5R offers professional photographers a high-performance gimbal and camera system with an M4/3 interchangeable lens. The Type 4/3 CMOS sensor supports lossless 4K RAW video and 16 MP still photos, with shooting modes including burst, AEB and timelapse. Integrated into the system is a dedicated 512GB X5R SSD that stores lossless 4K RAW video at up to 2.4Gbps and can be synced with DJI CineLight for post-processing RAW files.
INSPIRE RAW User Manual DJI MFT 15mm f/1.
INSPIRE RAW User Manual Filter Model DJI Balancing Ring DJI MFT 15mm f/1.7 ASPH BR-Φ46-10 46 mm 10 g Required Panasonic Lumix G Leica DG Summilux 15mm f/1.7 ASPH BR-Φ46-10 46 mm 10 g Required Olympus M.Zuiko Digital ED 12mm f/2.0 BR-Φ46-10 46 mm 10 g Not required Olympus M.Zuiko Digital ED 17mm f/1.8 BR-Φ46-33 46 mm 33 g Not required Olympus M.Zuiko Digital ED 25mm f/1.8 Not required 46 mm 10 g Not required Olympus M.Zuiko Digital ED 45mm f/1.
INSPIRE RAW User Manual 4. Align the two Lens Mount Indexes on the camera body and camera lens, and insert the camera lens into the body of the camera. 5. Rotate the camera lens clockwise until you hear a click. 6. Rotate the Lens Lock counterclockwise to lock it. 7. Mount the Balancing Ring (or a filter) and the Lens Hood. 6 ck Cli 4 Balancing Ring (or Filter) Lens Hood 5 7 8. Insert the Micro SD card and the X5R SSD. 9 8 To remove the camera lens, power off the battery and then: 1.
INSPIRE RAW User Manual It is recommended to wrap a dust cover around the lens to prevent contamination. DJI produces dedicated dust covers for the DJI MFT 15mm f/1.7 ASPH and the Panasonic Lumix G Leica DG Summilux 15mm f/1.7 ASPH. Other lenses may require you to purchase a third-party dust cover. It is important to tighten the Lens Lock after attaching the camera lens, as this can reduce the vibrations of the lens when the aircraft is moving in flight.
INSPIRE RAW User Manual Mechanical Range The 3-axis gimbal provides a incredibly stable and mobile platform for the camera system to capture silky smooth video. The gimbal can tilt the camera up to 120 degrees and pan 320 degrees in either direction, providing 640 degrees of yaw rotation. +30° 0° -320° +320° -90° Ground Level DO NOT attach or detach the Zenmuse X5R when the aircraft is powered on. Take off from a flat, open area and protect the gimbal after powering up.
INSPIRE RAW User Manual Press C1 or C2 button to switch from pitch mode to yaw mode. You may use the gimbal dial to pan the gimbal under yaw mode. Press C1 or C2 again to exit yaw mode. While pressing the C1 button, turn the gimbal dial to focus the X5 camera manually. While pressing the C2 button, turn the camera settings dial to fine tune the roll axis of the gimbal. Using DJI GO App to Control Gimbal Follow the steps below to use DJI GO app to control the gimbal orientation: 1.
INSPIRE RAW User Manual Follow Mode The angle between Gimbal’s orientation and aircraft’s nose remains constant at all times. One user alone can control the pitch motion of the Gimbal, but a second user is required to control the pan motion using a second remote controller. FPV Mode The Gimbal will lock to the movements of the aircraft to provide a FirstPerson-View flying experience. Free Mode The Gimbal’s motion is independent of the aircraft’s orientation.
INSPIRE RAW User Manual Camera Panel All camera operations are done on the Camera Panel in Camera View of the DJI GO app. [1] [1] Menu [2] [2] Photo/Video Switch [3] [3] Shutter/Record Button [4] Playback [4] [5] Settings [5] Always set the camera lens to AF mode. The focus and aperture will be controlled by the DJI GO app digitally. Basic Shooting Ensure the Micro SD card is inserted to enable camera operations.
INSPIRE RAW User Manual Advanced Settings Exposure Modes Tap to choose from the following exposure modes: 1. AUTO The shutter speed and aperture are set automatically to obtain the correct exposure. 2. S (Shutter Priority) Set your desired shutter speed, while the camera chooses the aperture automatically. This mode is ideal for freezing action, creating motion blur or low-light shots. 3. A (Aperture Priority) Set your desired aperture, while the camera chooses the shutter speed automatically.
INSPIRE RAW User Manual List of Settings Photo Shooting Modes Single Shot, HDR Shot, Burst Mode (3/5/7), AEB (3/5 bracketed frames), Timed-lapse(5s/7s/10s/20s/30s) Image Size 4:3, 16:9 Image Format RAW, JPEG, JPEG+RAW White Balance Auto, Sunny, Cloudy, Incandescent, Neon, Custom (2000K~10000K) Style Standard, Landscape, Soft, Custom (Sharpness/Contrast/ Saturation) Color D-Log, D-Cinelike, None, Art, B&W, Vivid, Beach, Dream, Classic, Nostalgia Video Video Size 4K (SSD RAW): 4096 × 2160 24p
INSPIRE RAW User Manual Managing your Photos and Videos Playback Tap in the DJI GO app or press the Playback Button on the remote controller to review photos and videos that you have captured. Press the same button again to return to capturing images. You can view and delete files on the Micro SD card. Downloading your Files from Micro SD Card Download your photo and video files to your PC via the Micro USB Port or using a Micro SD card reader. The camera must be powered on to access the files.
DJI CineLight Use DJI CineLight to post-process X5R SSD files © 2016 DJI. All Rights Reserved.
DJI CineLight Files on the X5R SSD must be exported with DJI CineLight. Installing DJI CineLight System Requirements Mac OS X 10.10 or later (versions 10.11 and 10.11.1 not fully supported) 6G of memory Intel i5/i7 with 4+ cores 1440x900 resolution Mac Pro, iMac and MacBook Pro recommended Devices supporting USB3.0 recommended Discrete graphics card recommended Installation (Installer is included on the X5R SSD) 1. Plug the X5R SSD into the X5R Reader. 2.
INSPIRE RAW User Manual Accessing your Files 1. Power off the Zenmuse X5R. While holding down the X5R SSD Release Button, remove the X5R SSD. 2. Insert the X5R SSD into the X5R Reader. 3. Connect the X5 Reader to your computer with a USB cable. 4. Launch DJI CineLight. Power LED Working Status LED The X5R READER does not have power. / The X5R SSD is Off not inserted. Off Idle. Solid The X5R READER is powered on and the X5R SSD is Blinking Read and write Blue inserted correctly. in progress.
INSPIRE RAW User Manual [1] Theme Switch : Toggle between the day and night themes. [2] Libraries Shows a list of connected devices (such as the X5R SSD) and your computer’s local library. Connected Devices: Displays the device’s name, read-only mode, free disk space and total disk space. Computer: Displays saved DNG sequences. : Right click the device name and choose “Quick Format” to reformat the connected device. : Indicates that the connected device is read-only and cannot be reformatted.
INSPIRE RAW User Manual A: Export Format Options DNG Sequence: Export the DNG sequence. TIFF Sequence: Convert the DNG sequence to TIFF format and export. ProRes: Export the DNG sequence as a movie clip encoded in ProRes.
INSPIRE RAW User Manual [8] Display Controls : Zoom in or out, scale or auto fit. Space Bar Play/Pause Play previous frame Play next frame Trackpad Drag files, zoom in or zoom out. [9] Thumbnails [10] Playback Controls : Play previous frame : Play/Stop : Play next frame [11] Skip Frame Option : Options to play the movie clip frame by frame or according to time.
INSPIRE RAW User Manual [16] Color Calibrations A. Basic: Adjust the white balance, exposure and saturation. B. Tone Curve: Adjust up to 5 points on the tone curve. C. Denoise and Sharpen Adjust the denoise and sharpening values. A B C D. Color Management Select the output color space. E. Image Information Detailed information of the movie clip. F. Camera setting parameters when shooting. D E F [17] Analysis A. Vector Scope B. RGB and YCbCr Parades A B © 2016 DJI. All Rights Reserved.
DJI GO App This chapter describes the four main GUI of the DJI GO app. 58 © 2016 DJI. All Rights Reserved.
DJI GO App Use the DJI GO app to configure your aircraft. If using a gimbal or camera, you can also control the gimbal or camera in the app. The Library, Explore, and Me sections in the app allow you to share your content with friends.
INSPIRE RAW User Manual [1] System Status : Indicates the current aircraft system status and GPS signal strength. [2] Battery Level Indicator : Describes the battery level of the aircraft according to its immediate status. The colored zones represent the various stages of battery level. When the battery level drops to a certain stage, the system will prompt the user to take the appropriate action. [3] Flight Mode : The text next to this icon indicates the current flight mode.
INSPIRE RAW User Manual Playback : Tap this icon to play back photos and videos after they are captured. Camera Settings : Tap this icon to set the ISO, Shutter Speed and Exposure Value of the camera. [10] Mini Map Displays the flight path of the current flight. Tap the Mini Map to switch between Camera View and Map View. [11] Flight Telemetry H: 39M V.S 2.3 M/S D: 210M H.S 4.2 M/S 232M Flight Attitude and Radar Function: The aircraft’s flight attitude is indicated by the target-like icon.
INSPIRE RAW User Manual [14] Gimbal Operation Mode This icon will be displayed when using a DJI gimbal (or camera). Tap to select a mode or re-align the gimbal. Follow Mode The gimbal’s orientation is aligned with the aircraft’s nose. One user alone can control the pitch motion of the gimbal, but a second operator is required to control the yaw motion using a second remote controller. FPV Mode The gimbal will lock to the movement of the aircraft to provide a FirstPerson-View flying experience.
INSPIRE RAW User Manual Editor An intelligent video editor is built into the DJI GO app. After recording several video clips and downloading them to your mobile device, go to Editor on the home screen. You can then select a template and a specified number of clips which are automatically combined to create a short film that can be shared immediately. Skypixel Find out about our latest events, featured products and trending Skypixel uploads in the Explore page.
Flight This chapter describes the flight safety and flight restrictions. 64 © 2016 DJI. All Rights Reserved.
Flight Once pre-flight preparation is complete, it is recommended to use the flight simulator to learn how to fly safely. Ensure that all flights are carried out in a suitable location. Flight Environment Requirements 1. Do not use the aircraft in severe weather conditions. These include wind speed exceeding 10m/s , snow, rain and smog. 2. Only fly in open areas. Tall buildings and steel structures may affect the accuracy of the on-board compass and GPS signal. 3.
INSPIRE RAW User Manual GPS Signal Strong Blinking Green Flight Limits DJI GO App Aircraft Status Indicator Max Height Flight altitude must be under the set height. Warning: Height limit reached. None. Max Radius Flight distance must be within the max radius. Warning: Distance limit reached. Rapid red flashing when close to the max radius limit.
INSPIRE 1640 feet Airports 66 feet 1 mile RAW User Manual R1 R2 320 feet 1640 feet 66 feet 1 mile 320 feet R1 R2 Restricted Areas: (1) Restricted Areas do not have a flight altitude restriction. (2) R around the designated Restricted Area is a Take-off Restricted area. Aircraft cannot takeoff within this zone. The value of R varies depending on the definition of the Restricted Area. (3) A “warning zone” has been set around each Restricted Area. When the aircraft is within 0.
INSPIRE RAW User Manual GPS Signal Strong Zone No-fly Zone Restrictedaltitude flight zone Warning zone Free zone Blinking Green Restriction DJI GO App Prompt Motors will not start. Warning: You are in a No-fly zone. Take off prohibited. If the aircraft enters the restricted area in A mode but P mode activates the aircraft will automatically descend to land then stop its motors after landing. Warning: You are in a No-fly zone, automatic landing has begun. (If you are within 1.
INSPIRE RAW User Manual Preflight Checklist 1. 2. 3. 4. 5. 6. Remote controller, aircraft battery, and mobile device are fully charged. Propellers are mounted correctly and firmly. Micro-SD card has been inserted if necessary. Gimbal is functioning as normal. Motors can start and are functioning as normal. DJI GO app connected to the aircraft. Calibrating the Compass Only calibrate the compass when the DJI GO app or the status indicator prompt you to do so.
INSPIRE RAW User Manual 3. Hold the aircraft vertically with nose pointing downward, and rotate it 360 degrees around the center axis. Recalibrate the compass if the Aircraft Status Indicator show solid red. If the Aircraft Status Indicator blinks red and yellow after the calibration, move your aircraft to a different location to carry out compass calibration. Launch DJI GO App, follow the on-screen instruction to calibrate the compass. When to Recalibrate 1.
INSPIRE RAW User Manual Auto-Landing Use auto-landing to land your aircraft automatically if the Aircraft Status Indicator displays blinking green. Follow the steps below to use auto-landing: 1. Ensure the aircraft is in “P” mode. 2. Check the landing area condition before tapping “ ”, to perform landing. 3. Aircraft lowers the landing gear and proceed to land automatically. Landing gear will automatically raise when the aircraft reaches an altitude of 1.
INSPIRE RAW User Manual 6. Shoot photos and videos using the DJI GO app. 7. To land, hover over a level surface and gently pull down on the throttle slowly to descend. 8. After landing, execute the CSC command or hold the throttle at its lowest position for 3 seconds or more until the motors stop. 9. Turn off the Intelligent Flight Battery first, followed by the Remote Controller. When the Aircraft Status Indicator blinks yellow rapidly during flight, the aircraft has entered Failsafe mode.
FAQ © 2016 DJI. All Rights Reserved.
Troubleshooting (FAQ) 1. How can I put a GoPro camera on the Inspire 1 RAW? The Inspire 1 RAW does not currently support GoPro attachments. The gimbal is designed to hold DJI cameras only. 2. When will ground station functionality be available? The Inspire 1 RAW does not currently support ground station. Ground station will be available with future firmware updates. 3.
INSPIRE RAW User Manual 14. What flight controller does the Inspire 1 RAW use? The Inspire 1 RAW uses its own new flight controller. 15. Which motors and propellers does the Inspire 1 RAW come with? The Inspire 1 RAW uses 3510H motors and 1345T propellers. 16. Aircraft frame arm joints appear loosen, is that normal? The space of the joins shown in the below figure is normal and it will not affect the performance of aircraft, do not adjust the position of the screws on your own. 17.
Appendix 76 © 2016 DJI. All Rights Reserved.
Appendix Specifications Aircraft Model T600 Weight 2870 g (Battery and propellers included, Zenmuse X5R excluded) 3453 g (Battery, propellers and Zenmuse X5R included) Max Takeoff Weight Hovering Accuracy (P Mode) Max Angular Velocity 3500 g Vertical: 0.5 m Horizontal: 2.
INSPIRE RAW User Manual ISO Range Photo: 100-25600; Video: 100-6400 Electronic Shutter Speed Photo: 8s-1/800s; Video: 1/25s-1/8000s Field of View DJI MFT 15mm f/1.7 ASPH 72° Still Photography Modes Single shot Burst shooting:3/5/7 frames Auto Exposure Bracketing (AEB):3/5 bracketed frames at 0.7EV bias Timelapse (3/5/7/10/20/30/60 sec); HDR Video Resolution UHD: 4K (4096×2160) 24/25p, 4K (3840×2160) 24/25/30p, 2.
INSPIRE RAW User Manual Remote Controller Name C1 Operating Frequency 922.7MHz~927.7 MHz (Japan Only) 5.725~5.825 GHz;2.400~2.483 GHz Max Transmitting Distance FCC Compliant: 3.1 miles (5 km); CE Compliant: 2.1 miles (3.5 km) (unobstructed, free of interference) EIRP 10 dBm@900 MHz, 13 dBm@5.8 GHz, 20 dBm@2.
INSPIRE RAW User Manual Battery (Optional) Name Intelligent Flight Battery Model TB48 Capacity 5700 mAh Voltage 22.8 V Battery Type 6S LiPo High voltage battery Energy 129.96 Wh Net Weight 670 g Operating Temperature 14° to 104° F (-10° to 40° C) Storage Temperature Less than 3 months: -4° to 113° F (-20° to 45° C) More than 3 months: 72° to 82° F (22° to 28° C) Charging Temperature 32° to 104° F (0° to 40° C) Max Charging Power 180 W Max Flight Time Approx.
INSPIRE RAW User Manual Intelligent Flight Intelligent Flight mode includes Course Lock, Home Lock, Point of Interest (POI), Follow Me and Waypoints features to assist users to create professional shoots during the flight. Course Lock and Home Point lock helps to lock the orientation of aircraft so that the user can focus more on other operations. Point of Interest, Follow Me and Waypoints mode enable aircraft to fly automatically according to the preset flight maneuvers.
INSPIRE RAW User Manual Updating the Remote Controller Firmware Ensure the DJI GO app has been updated to v1.2.0 before updating the remote controller. The System Status bar in Camera View of the DJI GO App will flash several times if a firmware update is available. Follow these steps to update the firmware via the DJI GO App. Step 1- Check Battery and SD Card Capacity 1. The remote controller has at least 50% battery level. 2. Your mobile device is able to access the internet. 3.
INSPIRE RAW User Manual Ensure there is only one firmware package file stored on your SD card. Only storage devices that are formatted for FAT32 and exFAT file systems are supported for aircraft and remote controller firmware updates. Ensure the internet connection of your mobile device is stable when downloading the firmware update package. Turn on Airplane Mode on your mobile device before updating the firmware, as any incoming calls may disrupt the update process.
INSPIRE RAW User Manual which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help.
This content is subject to change. Download the latest version from www.dji.com/product/inspire-1-pro-and-raw If you have any questions about this document, please contact DJI by sending a message to DocSupport@dji.com. © 2016 DJI. All Rights Reserved.
