Operation Manual

44
©
2016 DJI. All Rights Reserved.
User Manual
INSPIRE RAW
DO NOT attach or detach the Zenmuse X5R when the aircraft is powered on.
Take off from a at, open area and protect the gimbal after powering up.
Ground Level
+
320°
-320°
+
30°
-90°
0°
Pan Control
Follow the instructions below to use the gimbal dial to control the pan movement of the gimbal:
1. Power on the aircraft and remote control, launch DJI GO app and enter “Camera” page.
2. Tap “RC Control Settings” icon and select either C1 or C2 customizable button as the gimbal pitch/
yaw switching button.
3. Select “Gimbal Pitch/Yaw” from the dropdown list.
RC Control Setting
Remote Control Calibration
Stick Mode
Gimbal Pitch/YawC1 C2 Reset gimbal yaw
Default stick mode is Mode 2, changing stick modes alters the way the aircraft is controlled.
Do not change unless familiar with your new mode.
You can customize the C1 and C2 buttons on the back
of the remote controller.
Linking Remote Controller
Mechanical Range
The 3-axis gimbal provides a incredibly stable and mobile platform for the camera system to capture silky
smooth video. The gimbal can tilt the camera up to 120 degrees and pan 320 degrees in either direction,
providing 640 degrees of yaw rotation.