Operation Manual
70
©
2016 DJI. All Rights Reserved.
User Manual
INSPIRE RAW
3. Hold the aircraft vertically with nose pointing downward, and rotate it 360 degrees around the center
axis. Recalibrate the compass if the Aircraft Status Indicator show solid red.
If the Aircraft Status Indicator blinks red and yellow after the calibration, move your aircraft to a
different location to carry out compass calibration.
Launch DJI GO App, follow the on-screen instruction to calibrate the compass.
When to Recalibrate
1. When compass data is abnormal, and the Aircraft Status Indicator is blinking red and yellow.
2. When the mechanical structure of the Inspire 1 RAW has changed, i.e. changed mounting position of
the compass.
3. When severe drifting occurs in ight, i.e. the Inspire 1 RAW does not y in straight lines.
Auto Take-off and Auto Landing
Auto Take-off
Use auto take-off to take off your aircraft automatically if the Aircraft Status Indicator displays blinking
green. Follow the steps below to use auto take-off:
1. Launch DJI GO app, enter camera page.
2. Ensure the aircraft is in “P” mode.
3. Go through the pre-ight checklist.
4. Tap“
”, and conrm ight condition. Slide to conrm and take-off.
5. Aircraft takes off and hovers at 1.5 meters above ground.