Operation Manual

Aircraft

INSPIRE 1

User Manual

Ensure propellers are attached to its corresponding motors, otherwise the aircraft cannot take off.

Handling the propellers with care.

Manually tighten each of the propellers on the corresponding motors to ensure it is attached rmly.

Detaching the Propellers

Hold the motor still. Then spin the propeller in the unlock direction indicated on the propeller itself.

Detaching1345sQuick-ReleasePropellers

Press the 1345s Quick-Release propellers downward firmly then rotate the propeller in the unlock

direction to unlock the propellers.

Check that the propellers and motors are installed correctly and rmly before every ight.

Ensure that all propellers are in good condition before each ight. DO NOT use old, chipped,

or broken propellers.

To avoid injury, STAND CLEAR of and DO NOT touch propellers or motors when they are spinning.

ONLY use original DJI propellers for a better and safer ight experience.

DJI Intelligent Flight Battery

The DJI Intelligent Flight Battery has a capacity of 4500mAh, voltage of 22.2V, and smart charge-

discharge functionality. It can only be charged with an appropriate DJI approved charger.

Intelligent Flight Battery

Charger

match the nut with the dots on the motors of your Inspire 1:

Propellers Greycap(1345) Blackcap(1345R)

Figure

Attach On Motors without a black dot Motors with a black dot

Legends

Lock : Turn the propellers in the indicated direction to mount and tighten

Unlock : Turn the propellers in the indicated direction to loosen and remove

Attaching the Propellers

1. Attach the propellers with a grey nut onto a motor without a black dot and spin the propellers clockwise

to secure them in place. Attach the propellers with a black nut onto a motor with a black dot and spin

the propellers counter clockwise to secure its position. Be sure to completely tighten each propeller by

hand before ight.