Operation Manual

Product Profile

INSPIRE 1

User Manual

Place all propellers onto the correct motor and tighten by hand to ensure security before ight.

Preparing Remote Controller

Tilt the Mobile Device Holder to the desired position then adjust the antenna as shown.

1. Press the button on the side of the Mobile Device Holder to release the clamp, adjust it to t then attach

your mobile device.

2. Connect your mobile device to the remote controller with a USB cable.

3. Plug one end of the cable into your mobile device, and the other end into the USB port on the back of

the remote controller.

Attaching1345sQuick-ReleasePropellers

The 1345s Quick-Release propeller is the upgrade version of the propellers that greatly enhance the

reliability of the propeller during the ight. Following the steps below to attach the 1345s Quick-Release

propellers.

1. Install the propellers with a white dot onto the mounting plates that have a white dot, and install the

propellers without a white dot onto the mounting plates that do not have a white dot.

2. Align the hook (A) on the propellers with the securing spring (B), then press down the propeller onto

the mounting plate then rotate the propellers according to the lock direction until it is secured.

Without

white dot

Without white dot

White dot