Manual

ManualsBrandsDJI ManualsHardwareiOSD mini

iOSD mini User Manual V1.06

Introduction

DJI iOSD mini is specially designed for DJI flight control system during the FPV flight or other aero-modeling activities. It

displays real time video and OSD information, to bring users more involved flight experience.

Specified autopilot systems for the iOSD mini:

Autopilot System

Required Accessories

Firmware Version

NAZA-M series

NAZA PMU V2

4.02 or above

WooKong-M series

---

5.16 or above

Specifications

Voltage

Working Current (Typical Value)

180mA@6V

Temperature

-20℃~60℃

Dimension

33.2mm x 28.2mm x 10.55mm

Weight

14g

Video Input/ Output Mode

PAL/NTSC (automatically recognize)

Assembly & Connection

1. Prepare the iOSD mini、DJI autopilot system、video input source(e.g. camera)、wireless video transmitter

module(including transmitter and receiver), monitor, and then assemble all these to aircraft.

2. Connect the iOSD mini according to the following diagram. Connect your wireless video receiver module and

monitor correctly.

CAN-Bus port(extended port)

To wireless video transmitter module GND

To wireless video transmitter module signal

To video input device(e.g. camera) GND

To PC for configuration and upgrade via a

Micro-USB cable.

To video input device(e.g. camera) signal

CAN-Bus port, is for iOSD mini

power supply and communication

with Autopilot system.

iOSD mini LED Indicator

Abnormal

Normal

Data communicating

Summary of content (5 pages)

PAGE 1
iOSD mini User Manual V1.06 Introduction DJI iOSD mini is specially designed for DJI flight control system during the FPV flight or other aero-modeling activities. It displays real time video and OSD information, to bring users more involved flight experience. Specified autopilot systems for the iOSD mini: Autopilot System Required Accessories Firmware Version NAZA-M series NAZA PMU V2 4.02 or above WooKong-M series --- 5.
PAGE 2
OSD Display Description 6 1 7 P R 0o 12.0V 94% 8 V 0o 9 m 0.0 s 0 45~179 45~179 2 D 15m H 1m 3 14 4 5 0.0 Az 34° 11 12 ATT FS 13 15 NO. 10 Function Display Description Real time battery voltage of the aircraft power, unit in V. (For PHANTOM 2 there will be current battery level percentage 1 Power voltage 、 blink shown in addition.) Blink: first level low-voltage alert, the alert threshold is same to the protection voltage value set in the assistant software.
PAGE 3
13 Compass error indicator blink Blinking will appear when compass has errors, please calibrate your compass. Azimuth angle is a horizontal angle measured clockwise from the North base line to the line goes N through the home point and 0° 14 Azimuth angle Az(0o ~360o) W H 270° 90° E D Az=225° 180° S Home Point Aircraft aircraft position. Users can locate the aircraft by calculating the aircraft position using Az, D , H.
PAGE 4
Assistant Software Usage Language iOSD Setting Software & Firmware Upgrade etc Text Indication Main Window Warning Setting Data Communication Indicator PC Connection Indicator iOSD is successfully connected to Assistant software. Trouble Shooting NO. 1 2 3 4 What Only OSD information, video signal loss. Why Video input error. How to Ensure the connection between iOSD mini and video input port is OK.
PAGE 5
DJI Innovations with all rights reserved. No part of this product or manual shall be reproduced in any form without the prior written consent or authorization of DJI Innovations. No patent liability is assumed with respect to the use of the product or information contained herein. ©2013 DJI Innovations. All Rights Reserved.