User Manual

1） Display HDMI OSD: Enable or disable the OSD display on your HDMI device.

2） OSD Margin: Adjust the OSD position to fit HDMI displays of different sizes.

3） 720P Refresh Rate: Set the refresh rate to 50Hz or 60Hz in Realtime or Smooth mode.

4） 1080I Refresh Rate: Set the refresh rate to 50Hz or 60Hz in Full HD mode.

Note

The OSD is not available when AV video input is selected.

[6] Warning Settings

1） Alarm: Enable or disable the alarm.

If enabled, the app will set off an alarm in the following scenarios:

a） The aircraft battery is low.

b） The remote control’s transmission signal has been lost.

2） Ground system timeout: Enable or disable ground system timeout. When enabled, if the ground

system is idle for 30 minutes, an alarm will sound and the system will power off.

[7] Signal Diagnostic

If the maximum flight distance is significantly reduced, this could be caused by damaged antennas or a