User manual

Table Of Contents

DJI MATRICE 100

User Manual

Attaching the Propellers

Propeller Safety

1. Attach the propellers onto the correct motors stated in this manual. Rotation indicators are found on

both the motors and the propellers to help you determine their direction of rotation. Show vigilance

when attaching or detaching the propellers.

2. The propellers and the mounting plates may show signs of wear after continuous use. Inspect the

hooks inside the propeller nut and the mounting plate, and replace the propeller or the mounting

plate if necessary. If you have trouble identifying signs of wear, read Step 3 in the Installation

section for more details.

3. Ensure the mounting plate and the securing spring are rmly attached to the motor before every

ight.

4. Ensure that all propellers are in good condition before every ight. Do NOT use old, chipped, or

broken propellers.

5. Propellers should never be used after they have been involved in a crash or a collision. If such an

event occurs, replace the propellers before ying again.

6. To avoid injury, stand clear of the propellers and motors when they are spinning.

7. The propellers, securing springs, and mounting plates have an approximate lifespan of 200 ights.

Inspect them regularly to determine if they need replacement.

8. Only use ofcial DJI propellers for a safer and better ying experience.

9. Handle the propellers with care.

10. Always follow the prescribed storage procedures to avoid damaging the propellers.

Installation

1. Attach the propellers with a white dot onto the mounting plate with a white dot, and attach the

propellers without a dot onto the mounting plate without a dot.

2. Align the hook (A) with the securing spring (B). While pressing the propeller onto the mounting

plate, rotate the propeller in the lock direction

until it is secured.

Hook

Mounting Plate

No Dot

White Dot