User manual

Table Of Contents

DJI MATRICE 100

User Manual

Using the Battery

Installing the Battery

Insert the Intelligent Flight Battery into the battery compartment as shown below.

Powering On/Off the Battery

LED1

LED2

LED3

LED4

Power Button (Built-in LED)

Powering On: Press the Power Button once, then press again and hold for 2 seconds to power on.

The Power LED will turn red and the Battery Level Indicators will display the current battery level.

Powering Off: Press the Power Button once, then press again and hold for 2 seconds to power off.

Low Temperature Notice:

1. Using the Intelligent Flight Battery at core temperatures below -10℃ is not advised. Between -10℃

and 5℃, the Intelligent Flight Battery should attain a voltage of 4.2 V, but it is recommended that

you apply the insulation sticker to the battery to prevent a rapid drop in temperature.

2. In cold environments (i.e. air temperature below 5℃), the performance of the Intelligent Flight

Battery is reduced. Ensure the Intelligent Flight Battery is fully charged and attains a voltage of 4.35

V before takeoff.

Never insert the Intelligent Flight Battery into or remove it from the battery compartment of the

Matrice 100 when it is powered on.