User manual

26
©
2016 DJI. All Rights Reserved.
DJI MATRICE 100 User Manual
Battery Life
LED1 LED2 LED3 LED4 Battery Life
90%~100%
80%~90%
70%~80%
60%~70%
50%~60%
40%~50%
30%~40%
20%~30%
below 20%
When the battery life reaches 0%, it can no longer be used.
For more information about the battery, launch the DJI GO app and go to the Battery tab.
Charging the Intelligent Flight Battery
1. Connect the battery charger to a suitable power supply (100-240V 50/60Hz).
2. Open the protection cap and connect the Intelligent Flight Battery to the battery charger. If the
battery level is above 95%, turn on the battery before charging.
3. The Battery Level Indicator will display the current battery level during charging.
4. The Intelligent Flight Battery is fully charged when Battery Level Indicators are all off. Disconnect
the Intelligent Flight Battery from the battery charger.
Do NOT charge the Intelligent Flight Battery and the remote controller (model: A14-100P1A)
at the same time to avoid overloading the battery charger.
Air cool the Intelligent Flight Battery after each ight. Allow its temperature to drop to room
temperature before charging.
The charging temperature range is 0 to 40℃. The battery management system will stop the
battery from charging when the battery cell temperature is out of range.
Charger
Intelligent Flight Battery
Power Outlet