User manual

Table Of Contents

Using the Remote Controller

Remote Controller Prole

The remote controller integrates video downlink and aircraft control into one system. The combined

system operates at 2.4 GHz with a maximum signal transmission range of 5 km. The device features

a number of standard and customizable buttons that allow users to quickly access certain aircraft

functions, such as taking and reviewing photos/videos, as well as controlling the gimbal motion. It is

Compliance Version: The remote controller is compliant with both CE and FCC regulations.

Operating Mode: Control can be set to Mode 1, Mode 2, or a custom mode in the DJI GO app.

Mode 1: The right stick serves as the throttle.

Mode 2: The left stick serves as the throttle.

Do NOT operate more than 3 aircrafts within in the same area (size equivalent to a soccer

eld) to prevent transmission interference.

Preparing Remote Controller

Mounting the Mobile Device Holder:

1. Unfold the Mobile Device Holder . Remove the screw using the slotted screwdriver coming with

the Matrice 100

Mounting Hole

Metal Loop

Screw Lock

2. Plug the Mobile Device Holder into the remote controller and tighten the screw lock.

3. Line up the hole on the Mobile Device Holder with the metal loop on the remote controller. Insert

and tighten the screw.