User manual

©
2016 DJI. All Rights Reserved.
29
DJI MATRICE 100 User Manual
Tilt the Mobile Device Holder to the desired position and then adjust the antenna as shown. Follow
the instructions below to connect your mobile device to the remote controller:
1. Press the button on the side of the Mobile Device Holder to release the clamp.
2. Place your mobile device inside the clamp and adjust it to secure your mobile device.
3. Connect your mobile device to the remote controller via a USB cable.
Remote Controller Diagram
[1]
[2]
[4]
[5]
[6]
[7]
[8]
[3]
[3] Control Stick
Controls the aircraft movement.
[4] Return-to-Home (RTH) Button
Press and hold this button to initiate
Return-to-Home (RTH).
[5] RTH LED
Circular LED around the RTH button
which displays the RTH status.
[6] Battery Level LEDs
Display the current battery level.
[7] Status LED
Indicates whether the remote controller
is linked to the aircraft.
[8] Power Button
Used to power on/off the remote controller.
[1] Antennas
Relays the aircraft control and video signals.
[2] Mobile Device Holder
Mounting place for your mobile device.