User manual

©
2016 DJI. All Rights Reserved.
35
DJI MATRICE 100 User Manual
Connecting Your Mobile Device
Tilt the Mobile Device Holder to the desired position, then press the button on the side to release the
clamp. Place your mobile device inside the clamp and adjust it to secure your mobile device. Now
connect your mobile device to the remote controller with a USB cable.
Optimal Transmission Range
The signal transmission between the aircraft and the remote controller performs best when the aircraft
is within the optimal transmission range. Open up the antennas on the remote controller to optimize
transmission range. Ideally, the at surface of the antenna should be facing the aircraft. If the signal is
weak, y the aircraft closer to you.
Dual Remote Controllers Mode
More than one remote controller can be connected to the same aircraft in the Dual Remote Controllers
mode. When using the DJI Zenmuse X3 Gimbal and Camera in the Dual Remote Controllers mode,
the Master remote controller controls the movement of the aircraft, while the Slave remote controller
controls the movement of the gimbal and camera. When multiple Slave remote controllers (max 6) are
connected to the aircraft, only the rst connected Slave remote controller is able to control the gimbal.
The remaining Slave remote controllers can view the live feed video from the aircraft and set the
camera parameters, but cannot control the gimbal.
Optimal Transmission Range
Strong Weak