User manual

©
2016 DJI. All Rights Reserved.
43
DJI MATRICE 100 User Manual
GPS
The aircraft automatically descends and lands if RTH is triggered when the aircraft flies
within a 65 feet (20 meter) radius of the Home Point.
The aircraft cannot avoid obstruction during Failsafe RTH, therefore it is important to set a
reasonable Failsafe altitude before each ight. Go to the DJI GO app > Camera View >
>
Advanced Settings > Failsafe Mode > Set Return-to-Home Altitude.
The aircraft will stop ascending and immediately return to the Home Point if you move the
throttle stick during Failsafe RTH.
Dynamic Home Point
Dynamic Home Point is useful in situations when the operator is in motion and requires a Home Point
that is different from the takeoff point. There are two options for Dynamic Home Point:
1. Set the aircraft’s current coordinates as the Home Point.
2. Set the remote controller’s current coordinates as the Home Point.
Ensure the space above the GPS module (shown above) is not obstructed when using
Dynamic Home Point.
Follow the instructions below to use Dynamic Home Point:
1. Connect your mobile device to the remote controller and go to the DJI GO app > Camera View.
2. Tap
> to set the remote controller’s current coordinates as the Home Point; tap > to set
the aircraft’s current coordinates as the Home Point.
3. The Aircraft Status Indicator will flash green to indicate that the new Home Point has been set
successfully.