User manual

Table Of Contents

DJI MATRICE 100

User Manual

[1] Flight Mode

: The text next to this icon indicates the current ight mode.

Tap this icon to congure the MC (Main Controller) Settings, to change the ight limits and set the

gain values.

When using the DJI GO app for the rst time, the aircraft is in Beginner Mode. In this mode,

the ight altitude and ight distance are set to 30 m. Tap

to exit Beginner Mode.

[2] GPS Signal Strength

: Shows the current GPS signal strength. Green bars indicate adequate GPS strength.

[3] IOC Settings

CL: Displays the IOC settings when the aircraft has entered F-Mode. Tap this icon to view the

IOC menu and select the desired IOC mode.

[4] System Status

: Indicates the current aircraft system status and GPS signal strength.

[5] Battery Level Indicator

: Describes the battery level of the aircraft according to its immediate status. The colored

zones represent the various stages of battery level. When the battery level drops to a certain

stage, the system will prompt the user to take the appropriate action.

[6] Remote Controller Signal

: Shows the signal strength of the remote controller.

[7] HD Video Link Signal Strength

: Shows the signal strength of the HD video downlink between the aircraft and the remote

controller.

[8] Battery Level

: Shows the current battery level.

Tap this icon to view the battery information menu where you can set the battery warning

thresholds and view the battery log.

[9] General Settings

: Tap this icon to view General Settings where you can set the flight parameters, reset the

camera settings, enable the Quick Review function, adjust the Gimbal Roll value, and enable the

Flight Route display.

[10] Camera Operation Bar

Shutter and Recording Settings

: Tap this icon to enter various camera value settings including the Color mode, Video Size,

and Image Size.

Shutter

: Tap this button to take a single photo. Press and hold this button to switch between Single

Shot, Triple Shot and Timed Shot modes.