User manual

Table Of Contents

Using the PC Assistant

1. Go to the Matrice 100 product page and download:

a) DJI Assistant 2 package

b) DJI WIN driver (if you use Windows 7 or 8)

http://www.dji.com/product/matrice100/info#downloads

2. Extract the DJI Assistant 2 package to the desired directory. No installation is required.

3. Install the DJI WIN driver if needed.

DJI Assistant 2 supports Windows 7 (or later) or Mac OS X 10.9 (or later).

4. Launch DJI Assistant 2.

5. Connect the Matrice 100 to your PC with a Micro USB cable. Turn on the remote controller and the

aircraft. Do not disconnect the cable until conguration is complete.

Fill in the coordinates of the GPS module relative to the aircraft’s geometric center (GC). The aircraft’s

GC can be approximated as the intersection of lines joining opposite motors, at the same level as the

propeller rotation plane. Note the negative and positive directions of the X, Y and Z axes illustrated in

the application. Leave the IMU coordinates as the default values.

6. Choose “M100” from the list of connected devices and sign in with your DJI account.

Basic Setup