User manual

54
©
2016 DJI. All Rights Reserved.
DJI MATRICE 100 User Manual
GPS Signal is Strong Flashing Green
Zone Restrictions DJI GO App Warning
Aircraft Status
Indicator
No Fly
Zone
Motors will not start.
Warning: You are in a no y zone.
Takeoff prohibited.
Flashing Red
If the aircraft loses GPS
signal and enters the
restricted area but regains
GPS signal afterwards,
the aircraft will enter Semi-
Automatic Descent and
land itself.
Warning: You are in a no y zone.
Automatic landing has begun. (If the
aircraft is within R1)
Altitude-
Restricted
Zone
If the aircraft loses GPS
signal and enters the
restricted area but regains
GPS signal afterwards, it will
descend to a safe altitude
and hover 15 feet below the
safe altitude.
Warning: You are in a restricted
zone. Descending to a safe altitude.
(If the aircraft is within R2 but
outside R1)
Warning: You are in a restricted
zone. Max ight height restricted
between 20 and 120 m. Fly
Cautiously.
Warning
Zone
No ight restrictions.
Warning: You are approaching a
Restricted Area. Fly cautiously.
Free Zone
No ight restrictions. None. None.
Semi-Automatic Descent: All stick commands are available except the throttle stick command
during the descent and landing process. Motors will stop automatically after landing.
When ying in No Fly Zones, the Aircraft Status Indicator will ash red rapidly and continue
for 3 seconds, then switch to indicate the current ying status and continue for 5 seconds,
at which point it will switch back to ashing red rapidly.
For safety reasons, please do NOT y close to airports, highways, railway stations, railway
lines, city centers or other busy areas. Try to ensure the aircraft is visible at all times.
Pre-Flight Checklist
1. The remote controller, Intelligent Flight Battery, and your mobile device are fully charged.
2. Propellers are mounted correctly and rmly.
3. Motors start properly and are functioning as normal.
4. The DJI GO app is connected to the aircraft.