User manual

Table Of Contents

Product Prole

The DJI Matrice 100 is a stable, exible, and powerful ying platform. Its open platform and highly

customizable design makes it suitable for a wide range of applications in the areas of research,

business, and recreation.

The Matrice 100’s expandable center frame makes it easy to mount additional components and

devices to achieve greater functionality and results. An extra battery compartment for a second

Intelligent Flight Battery can be installed to deliver an extended ight time of up to 40 minutes.

Developers are granted full control over their ying platform with the built-in API Control feature, giving

them the freedom to customize a comprehensive aerial solution by using the DJI SDK.

Installation

Checking the Frame Arms

1. Ensure the motors are rmly attached to the frame arms, and can rotate freely.

2. Ensure the landing gear is rmly attached to the frame arms, and the antenna covers are in good

condition.

3. Ensure that all cables are intact.

4. Identify the marks M1, M2, M3, and M4 on the four frame arms.

Checking the Center Frame

To check the center frame and connect the cables, first remove the upper plate and the battery

compartment.

1. Remove the two screws (M3x8 self-tapping) on the Aircraft Status Indicator. Then gently remove

the indicator to avoid damaging the cables.

Motor

M1 - M4 Mark

Antenna Cover

Landing Gear

Motor Cables

LED Cable

Antenna Cable

Aircraft Status Indicator

Handle the indicator

cable gently