User manual

Table Of Contents

MATRICE 200

SERIES V2 User Manual

Center of Gravity Calibration

The center of gravity will shift when the aircraft payloads changes. To ensure stable flight, it is

required to recalibrate the aircraft’s center of gravity when a new payload is installed.

Calibrate in a windless environment. Make sure that the aircraft is hovering and there is a

strong GPS signal during calibration.

Maintain visual line of sight of the aircraft and pay attention to ight safety.

Calibration instructions: Go to Flight Controller Settings in the app, and tap Calibrate in the Center

of Gravity Auto Calibration section. The Aircraft Status Indicators will glow solid purple during

calibration. There will be a prompt in the app after calibration is completed.

Spotlight Pro

Spotlight Pro is a powerful new tracking mode that allows a single pilot to capture complex,

dramatic images. The gimbal will automatically adjust to keep the camera pointing at the subject.

Lock onto a subject in Spotlight Pro mode and the gimbal will capture the locked subject regardless

of the directions that the aircraft ies.

Instructions: Tap

in Camera View in the app, and then use your nger to draw a square around

the object in to begin tracking.

You can drag on a subject in DJI Pilot or move the gimbal control sticks to change the

subject's position in the shot.

Flight Recorder

Flight data is automatically recorded to the internal storage of the aircraft. You can connect the

aircraft to a computer via the USB port and export this data via DJI Assistant 2.

Attaching and Detaching the Propellers

Attaching the Propellers

Refer to "Mounting the Propellers" for details.

1.5M

D 30 m

H 10 m

H.S 10.0 m/s

H.S

V.S 2.0 m/s

V.S

2: 12: 45

113.95357, 22.54268

19:29

/MF

74%

4.07V

P-GPS

2.4G

In Flight (GPS)