User manual
Table Of Contents
- Using This Manual
- Product Profile
- Aircraft
- Components at the Rear of the Aircraft
- DJI AirSense
- D-RTK (for M210 RTK V2)
- DJI Intelligent Flight Battery
- Spotlight Pro
- Center of Gravity Calibration
- Flight Recorder
- Return-to-Home (RTH)
- Vision System and Infrared Sensing System
- Flight Status Indicator
- Flight Mode
- Profile
- Attaching and Detaching the Propellers
- Remote Controller
- Gimbal and Camera
- DJI Pilot App
- Flight
- Appendix
28
©
2019 DJI All Rights Reserved.
MATRICE 200
SERIES V2 User Manual
12. Heating: Batteries are able to work even in cold weather, ensuring a safe ight. Refer to "Using
the Battery" section for details.
13. Waterproof and Dustproof: The vehicle’s new airframe design improves the Ingress Protection
Rating to IP43 in accordance with the global IEC 60529 standards.
Refer to the
Disclaimer
and
Intelligent Flight Battery Safety Guidelines
before use. Users
take full responsibility for all operations and usage.
Charging the Intelligent Flight Battery
The Intelligent Flight Battery Charging Hub is designed for use with the Battery Charger. It charges
up to four Intelligent Flight Batteries simultaneously. The Charging Hub will intelligently charge
batteries in sequence according to battery power levels from high to low. The Micro USB port is
used for Charging Hub rmware updates.
Overview
[3]
[1]
[2]
[8]
[6]
[5]
[4]
[7]
[1] Power Port
[2] Charging Port
[3] Charging Port Cover
[4] Battery Charging Level Indicators
[5] Cover/Battery Release Button
[6] Status LEDs
[7] Firmware Update Port (Micro USB)
[8] Buzzer Switch
Connecting to a Power Source
Connect the standard Battery Charger to a power outlet (100-240 V, 50/60 Hz), then uncover the
rubber cover on the power port to connect the Charging Hub to the Battery Charger*.
Power OutletChargerCharging Hub
* It will take approximately 2.5 hours to fully charge the TB55 Intelligent Flight Battery, and 2 hours for the remote
controller. It will take a longer time to charge the Intelligent Flight Battery and remote controller together.
Connecting Batteries
Press the release button and open the corresponding charging port cover. Insert the Intelligent
Flight Battery into the charging port to begin charging. The Charging Hub will intelligently charge
batteries in sequence according to battery power levels from high to low. Refer to the "Status LED
Description” section for more information about Status LED blinking patterns. The buzzer will begin
beeping when charging is complete. Refer to the “Buzzer Beeping Description” for more information
about buzzer beeping patterns.