User manual
Table Of Contents
- Using This Manual
- Product Profile
- Aircraft
- Components at the Rear of the Aircraft
- DJI AirSense
- D-RTK (for M210 RTK V2)
- DJI Intelligent Flight Battery
- Spotlight Pro
- Center of Gravity Calibration
- Flight Recorder
- Return-to-Home (RTH)
- Vision System and Infrared Sensing System
- Flight Status Indicator
- Flight Mode
- Profile
- Attaching and Detaching the Propellers
- Remote Controller
- Gimbal and Camera
- DJI Pilot App
- Flight
- Appendix
40
©
2019 DJI All Rights Reserved.
MATRICE 200
SERIES V2 User Manual
Mounting the Monitor to the Remote Controller
Mounting the DJI CrystalSky Monitor*
Ensure that Part B is
unlocked. Connect Part
B to Part A.
Lock the Mounting Bracket.
Use a coin or the
screwdriver included to
adjust the tightness of
the tilt axis.
Mounting the Other Mobile Devices
For other mobile devices (e.g. iPhones, iPads), the Cendence Mobile Device Holder and an
appropriate USB cable are required.
Mounting the Monitor to the Remote Controller
A
B
Lock the Mounting
Bracket.
Use a coin or the
screwdriver included
to adjust the tightness
of the tilt axis.
Ensure that Part B is
unlocked. Connect
Part B to Part A.
Connecting the Mobile Device
Press the button to
release the clamp.
Place your mobile
device and adjust
the clamp to secure.
Connect your mobile
device with a USB cable.
A
B
2
3
1
* Note that the CrystalSky is excluded in the M200 V2.