User manual
Table Of Contents
- Using This Manual
- Product Profile
- Aircraft
- Components at the Rear of the Aircraft
- DJI AirSense
- D-RTK (for M210 RTK V2)
- DJI Intelligent Flight Battery
- Spotlight Pro
- Center of Gravity Calibration
- Flight Recorder
- Return-to-Home (RTH)
- Vision System and Infrared Sensing System
- Flight Status Indicator
- Flight Mode
- Profile
- Attaching and Detaching the Propellers
- Remote Controller
- Gimbal and Camera
- DJI Pilot App
- Flight
- Appendix
68
©
2019 DJI All Rights Reserved.
MATRICE 200
SERIES V2 User Manual
3. Hold the aircraft vertically, with the nose pointing downward, and rotate it 360 degrees around the
center axis. Re-calibrate the aircraft if the aircraft status indicators blink red.
If the Aircraft Status Indicator blinks red and yellow after the calibration procedure, move
your aircraft to a different location and try again.
DO NOT calibrate the compass near metal objects such as a metal bridge, cars, scaffolding.
If the aircraft status indicators are blinking red and yellow alternately after placing the aircraft
on the ground, the compass has detected magnetic interference. Please change your
location.