User manual

12
©
2018 DJI All Rights Reserved.
MATRICE 200 SERIES User Manual
Remote Controller Diagram
7
1
2
3
4
5
16
20
21
25
26
22
23
24
27
17
18
19
28
29
30
30
6
14
8
9
10
11
12
13
15
[1] HDMI Port
Output HDMI video signal.
[2] USB Port
Supported extended device, e.g. U disk.
[3] Micro SD Card Slot
Provides extra storage space for the dis-
play device, maximum card size is 128 GB.
[4] Micro USB Port
Use a Micro USB cable to connect to the
remote controller when in use, or to the PC
to congure parameters via DJI Assistant 2.
To update aircraft rmware, please use the
USB OTG cable.
[5] Headphone Jack
[6] Light-sensitive Port
Built-in light-sensitive sensor.
[7] Power Button
[8] Custom Button
[9] Setting Button
[10] Custom Button
[11] Back Button
[12] Battery Release Button
[13] WB37 Intelligent Battery
[14] Antennas
Relay aircraft control and video signa.
[15] Monitor Mounting Bracket
Used to mount the DJI CrystalSky monitor.
[16] Control Sticks
Control the orientation and movement of
the aircraft.
[17] Strap Hood
[18] Focus Adjustment Knob
Rotate to set the focal length.
[19] Return-to-Home (RTH) Button
Press and hold to initiate Return to Home
(RTH).
[20] Power Port
Connect to the Charger to charge the bat-
tery of the remote controller.
[21] EV Setting Button
Press and rotate the Camera Setting Dial
to set the EV.
[22] Shutter Setting Button
Press and rotate the Camera Setting Dial
to set the shutter speed.
[23] Aperture Setting Button
Press and rotate the Camera Setting Dial
to set the Aperture.
[24] ISO Setting Button
Press and rotate the Camera Setting Dial
to set the ISO.
[25] Pause Button
Press once to exit TapFly, ActiveTrack, or
other Intelligent Flight Modes.