User manual

©
2018 DJI All Rights Reserved.
39
MATRICE 200 SERIES User Manual
DO NOT move the Ground System during positioning.
The Ground System’s position coordinates can be set in DJI Assistant 2.
Firmware Updates
The Ground System and Air System of both D-RTK and Datalink Pro can be connected to a
computer separately to check if a rmware update is necessary using DJI Assistant 2.
Updating D-RTK
1. Connect the aircraft to the computer and toggle the USB Mode switch to the RTK position.
2. Launch DJI Assistant 2 and click the D-RTK icon to enter the D-RTK settings page.
3. Select the rmware update page (with the applicable aircraft type indicated after the rmware).
4. Connect the D-RTK Ground System to the computer (with DJI Assistant 2 already launched).
Updating Datalink Pro
1. Connect the Datalink Pro Ground System to the computer and move the 4-position switch to the
COMBO position.
2. Launch DJI Assistant 2 and click the Datalink Pro icon to enter the Datalink Pro settings page.
3. Click M210 RTK Datalink Pro-Ground displayed on the Datalink Pro settings page and follow the
prompts.